Antonio Perez

User Tools

Site Tools

Trace:
3com:corebuilder:configuration:software_recovery_procedure

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

3com:corebuilder:configuration:software_recovery_procedure [2021/04/13 20:14] – created dgonzalez3com:corebuilder:configuration:software_recovery_procedure [2021/04/13 20:42] (current) – dgonzalez
Line 1: Line 1:
-Title: CB3500 - Software recovery procedure +======SOFTWARE RECOVERY PROCEDURE======
-Goal+
  
-Software recovery procedure+**Fact**
  
-Fact+  * CoreBuilder 3500 
 +  * 3C35100, CoreBuilder 3500 chassis 
 +  * software recovery procedure
  
-CoreBuilder 3500+**Symptom**
  
-Fact+  * Chassis fails to boot
  
-3C35100, CoreBuilder 3500 chassis+**Fix**
  
-Fact+Review this sample failure and how to recover
  
-software recovery procedure 
  
-Symptom+**NOTE: ">>>>>" indicates the user input**
  
-Chassis fails to boot 
- 
-Fix 
- 
-Review this sample failure and how to recover 
-NOTE: ">>>>>" indicates the user input 
-SMC1 Loopback Test - abcdefghijklmnopqrstuvwxyz 0123456789 
-ABCDEFGHIJKLMNOPQRSTUVWXYZ ~!@#$%^&*)(_+- 
-={}[]/<>?`',.:;| 
-CoreBuilder 3500 Power On Verification Rom 
-@() SMC V1.23 beta, Created: Mon Oct 20 18:06:47 EDT 1997 
-Mode = Power-Up 
-AP Dram Detected = 16MB 
-Address line test from 0x0-0xffffff 
-Booting PowerUp Diagnostic 
-Cold Start - loading extended diagnostics 
-Loading... 764936 12 Done 
-Starting at 0x4000 
-CoreBuilder 3500 Diagnostic 
-@() SCM V1.22 final, Created: Sun Nov 9 18:18:14 EST 1997 
-Running (12) Memory Access Timeout 
-PASS 
-Running (13) Non Existent Memory Access Bus Error 
-PASS 
-Running (14) Reserved Resource Bus Error 
-PASS 
-Running (28) AP to FP Dram Address Line 
-PASS 
-Running (30) AP to Active FP Dram Address 
-PASS 
-Running (35) FP Dram Data Equals Address 
-PASS 
-Running (37) FP Command Interrupt 
-PASS 
-Running (38) FP Response Interrupt 
-PASS 
-Running (39) FP Non Maskable Interrupt 
-PASS 
-Running (44) FP Dram Data = Adrs with Cache Enabled 
-PASS 
-Running (45) MBA Bist 
-PASS 
-Running (46) ACA Bist 
-PASS 
-Running (47) XRA Bist Slot 1 
  
-PASS 
-Running (51) XTA Bist Slot 1 
-PASS 
-Running (58) MBA Queue Ram Random Data 
-PASS 
-Running (62) MBA Link Ram Random Data 
-PASS 
-Running (63) MBA Link Ram Parity 
-PASS 
-Running (68) ACA Ram Random Data 
-PASS 
-Running (74) X3C Sram Random Data 
-PASS 
-Running (75) IDMA 1 - AP Dram to AP Dram 
-PASS 
-Running (76) IDMA 1 - AP Dram to FP Dram 
-PASS 
-Running (77) IDMA 1 - FP Dram to FP Dram 
-PASS 
-Running (78) IDMA 1 - FP Dram to AP Dram 
-PASS 
-Running (90) Modem Port Internal Loopback 
-PASS 
-Running (96) Battery 
-PASS 
-Running (100) Ethernet Adapter Max Packet 
-PASS 
-Running (112) SCC1 Ethernet Transceiver Loopback 
-PASS 
-Running (117) Processor I2C Screen 
-PASS 
-Running (121) GRA SSram Random Data 
-PASS 
-Running (123) FDDI Adapter Max Packet 
-Environment: SYSTEM MODE 
-Testlist Passes: 1, Loop 
-Mode = Power-Up 
-AP Dram Detected = 16MB 
-Power Up Test Complete - No Errors Found 
-Booting System 
-CoreBuilder 3500 SysBoot Version 1.1 
-Press Enter to stop auto-boot 
-0 
->>>>>CRTL-X, then <CR> 
-CoreBuilder Boot-> 
-CoreBuilder Boot-> 
->>>>>CoreBuilder Boot> set 
-CoreBuilder Boot Menu 
-display Display current boot parameters 
-primary Set primary boot source 
  
-Usage: primary <flash | network> +  SMC1 Loopback Test - abcdefghijklmnopqrstuvwxyz 0123456789 
-flags Set boot flags +  ABCDEFGHIJKLMNOPQRSTUVWXYZ ~!@#$%^&*)(_+- 
-Usage: flags <hexValue> +  ={}[]/<>?`',.:;| 
-network Network parameters menu +  CoreBuilder 3500 Power On Verification Rom 
-.. Back to previous menu +  @() SMC V1.23 beta, Created: Mon Oct 20 18:06:47 EDT 1997 
-? Show menu +  Mode = Power-Up 
-CoreBuilder Boot> set> +  AP Dram Detected = 16MB 
->>>>>CoreBuilder Boot> set> primary network +  Address line test from 0x0-0xffffff 
->>>>>CoreBuilder Boot> set> flags 0x021b0000 +  Booting PowerUp Diagnostic 
->>>>>CoreBuilder Boot> set> network +  Cold Start - loading extended diagnostics 
-CoreBuilder Boot Menu +  Loading... 764936 12 Done 
-display Display current boot parameters +  Starting at 0x4000 
-systemIp Set system IP address +  CoreBuilder 3500 Diagnostic 
-Usage: systemIp <ipAddress> +  @() SCM V1.22 final, Created: Sun Nov 9 18:18:14 EST 1997 
-subnetMask Set IP subnet mask +  Running (12) Memory Access Timeout 
-Usage: subnetMask <subnet> +  PASS 
-gateway Set default gateway address +  Running (13) Non Existent Memory Access Bus Error 
-Usage: gateway <ipAddress> +  PASS 
-hostIp Set host IP address +  Running (14) Reserved Resource Bus Error 
-Usage: hostIp <ipAddress> +  PASS 
-filename Set boot file name +  Running (28) AP to FP Dram Address Line 
-Usage: filename <file> +  PASS 
-.. Back to previous menu +  Running (30) AP to Active FP Dram Address 
-? Show menu +  PASS 
-CoreBuilder Boot> set> network> +  Running (35) FP Dram Data Equals Address 
->>>>>CoreBuilder Boot> set> network> systemIp 151.104.7.88 +  PASS 
->>>>>CoreBuilder Boot> set> network> subnetMask +  Running (37) FP Command Interrupt 
-255.255.255.0 +  PASS 
->>>>>CoreBuilder Boot> set> network> hostIp 151.104.7.15 +  Running (38) FP Response Interrupt 
->>>>>CoreBuilder Boot> set> network> filename cb3500B +  PASS 
->>>>>CoreBuilder Boot> set> network> display +  Running (39) FP Non Maskable Interrupt 
-CoreBuilder Boot Parameters +  PASS 
-Primary Boot Source: network +  Running (44) FP Dram Data = Adrs with Cache Enabled 
-Network Boot Parameters +  PASS 
-System IP Address: 151.104.7.88 +  Running (45) MBA Bist 
-IP Subnet Mask: 255.255.255.0 +  PASS 
-Gateway IP Address: 0.0.0.0 +  R unning (46) ACA Bist 
-Host IP Address: 151.104.7.15 +  PASS 
-Boot file name: cb3500B +  Running (47) XRA Bist Slot 1 
-Secondary Boot Source: flash +   
-Boot Flags: 0x21B0000 +  PASS 
-CoreBuilder Boot> set> network> +    Running (51) XTA Bist Slot 1 
->>>>>CoreBuilder Boot> set> network> .. +  PASS 
-CoreBuilder Boot Menu +  Running (58) MBA Queue Ram Random Data 
-display Display current boot parameters +  PASS 
-primary Set primary boot source +  Running (62) MBA Link Ram Random Data 
-Usage: primary <flash | network> +  PASS 
-flags Set boot flags +  Running (63) MBA Link Ram Parity 
-Usage: flags <hexValue> +  PASS 
-network Network parameters menu+  Running (68) ACA Ram Random Data 
 +  PASS 
 +  Running (74) X3C Sram Random Data 
 +  PASS 
 +  Running (75) IDMA 1 - AP Dram to AP Dram 
 +  PASS 
 +  Running (76) IDMA 1 - AP Dram to FP Dram 
 +  PASS 
 +  Running (77) IDMA 1 - FP Dram to FP Dram 
 +  PASS 
 +  Running (78) IDMA 1 - FP Dram to AP Dram 
 +  PASS 
 +  Running (90) Modem Port Internal Loopback 
 +  PASS 
 +  Running (96) Battery 
 +  PASS 
 +  Running (100) Ethernet Adapter Max Packet 
 +  PASS 
 +  Running (112) SCC1 Ethernet Transceiver Loopback 
 +  PASS 
 +  Running (117) Processor I2C Screen 
 +  PASS 
 +  Running (121) GRA SSram Random Data 
 +  PASS 
 +  Running (123) FDDI Adapter Max Packet 
 +  Environment: SYSTEM MODE 
 +  Testlist Passes: 1, Loop 
 +  Mode = Power-Up 
 +  AP Dram Detected = 16MB 
 +  Power Up Test Complete - No Errors Found 
 +  Booting System 
 +  CoreBuilder 3500 SysBoot Version 1.1 
 +  Press Enter to stop auto-boot 
 +  0 
 +  >>>>>CRTL-X, then <CR> 
 +  CoreBuilder Boot-> 
 +  CoreBuilder Boot-> 
 +  >>>>>CoreBuilder Boot> set 
 +  CoreBuilder Boot Menu 
 +  display Display current boot parameters 
 +  primary Set primary boot source 
 +   
 +  Usage: primary <flash | network> 
 +  flags Set boot flags 
 +  Usage: flags <hexValue> 
 +  network Network parameters menu 
 +  .. Back to previous menu 
 +  ? Show menu 
 +  CoreBuilder Boot> set> 
 +  >>>>>CoreBuilder Boot> set> primary network 
 +  >>>>>CoreBuilder Boot> set> flags 0x021b0000 
 +  >>>>>CoreBuilder Boot> set> network 
 +  CoreBuilder Boot Menu 
 +  display Display current boot parameters 
 +  systemIp Set system IP address 
 +  Usage: systemIp <ipAddress> 
 +  subnetMask Set IP subnet mask 
 +  Usage: subnetMask <subnet> 
 +  gateway Set default gateway address 
 +  Usage: gateway <ipAddress> 
 +  hostIp Set host IP address 
 +  Usage: hostIp <ipAddress> 
 +  filename Set boot file name 
 +  Usage: filename <file> 
 +  .. Back to previous menu 
 +  ? Show menu 
 +  CoreBuilder Boot> set> network> 
 +  >>>>>CoreBuilder Boot> set> network> systemIp 151.104.7.88 
 +  >>>>>CoreBuilder Boot> set> network> subnetMask 
 +  255.255.255.0 
 +  >>>>>CoreBuilder Boot> set> network> hostIp 151.104.7.15 
 +  >>>>>CoreBuilder Boot> set> network> filename cb3500B 
 +  >>>>>CoreBuilder Boot> set> network> display 
 +  CoreBuilder Boot Parameters 
 +  Primary Boot Source: network 
 +  Network Boot Parameters 
 +  System IP Address: 151.104.7.88 
 +  IP Subnet Mask: 255.255.255.0 
 +  Gateway IP Address: 0.0.0.0 
 +  Host IP Address: 151.104.7.15 
 +  Boot file name: cb3500B 
 +  Secondary Boot Source: flash 
 +  Boot Flags: 0x21B0000 
 +  CoreBuilder Boot> set> network> 
 +  >>>>>CoreBuilder Boot> set> network> .. 
 +  CoreBuilder Boot Menu 
 +  display Display current boot parameters 
 +  primary Set primary boot source 
 +  Usage: primary <flash | network> 
 +  flags Set boot flags 
 +  Usage: flags <hexValue> 
 +  network Network parameters menu  
 +   
 +   
 +   
 +--- //[[nce@itclatam.com|David Gonzalez]] 2021/04/13 15:14//
3com/corebuilder/configuration/software_recovery_procedure.1618344880.txt.gz · Last modified: by dgonzalez
Donate Powered by PHP Valid HTML5 Valid CSS Driven by DokuWiki