Differences

This shows you the differences between two versions of the page.

--- aruba_networks:ap:ap_630 [2026/10/29 09:32] – aperez
+++ aruba_networks:ap:ap_630 [2026/10/29 09:33] (current) – removed aperez
@@ Line 1: / Line 1: @@
-====== ArubaInstant_Norma_8.12.0.5_92330 ======
-If the **IAP** is part of a **cluster**, the username will be **admin**, and **the password will be the serial number of any AP in the cluster**. If the IAP is running a software version earlier than **ArubaOS 8.5.0.0**, **admin** will remain the default **password**.
-**[[https://networkingsupport.hpe.com/downloads|HPE Networking Support Portal]]**
-**[[https://support.hpe.com/connect/s/product?language=en_US&kmpmoid=1013490535&tab=driversAndSoftware|HPE Support Center]]**
-----
-^ Field ^ Value ^
-| **Filename**       | ArubaInstant_Norma_8.12.0.5_92330 |
-| **Version**        | Access Points v8.12.0.5 (SSR)     |
-| **Product Series** |   * 670 Series Outdoor Access Points\\  * 670EX Series Outdoor Access Points\\  * 650 Series Campus Access Points\\  * 630 Series Campus Access Points |
-| **Size**           | 45.4 MB                           |
-| **Released On**    | Apr 6, 2025                       |
-| **Release Notes**  | [[https://example.com/release_notes|Release Notes]] |
-| **File Category**  | Software                          |
-{{ :aruba_networks:ap:arubainstant_norma_8.12.0.zip |}}
-----
-{{ :aruba_networks:ap:aruba-instant-8.12.0.5-release-notes.pdf |}}
-{{pdfjs 46em >:aruba_networks:ap:aruba-instant-8.12.0.5-release-notes.pdf}}
-----
-----
-====== ArubaOS_Norma_10.7.1.1_92045 ======
-^ Field ^ Value ^
-| **Filename**       | ArubaOS_Norma_10.7.1.1_92045 |
-| **Version**        | Access Points v10.7.1.1 (SSR) |
-| **Product Series** |   * 670 Series Outdoor Access Points\\  * 670EX Series Outdoor Access Points\\  * 650 Series Campus Access Points\\  * 630 Series Campus Access Points |
-| **Size**           | 106.8 MB |
-| **Released On**    | Mar 4, 2025 |
-| **Release Notes**  | [[https://example.com/release_notes|Release Notes]] |
-| **File Category**  | Software |
-{{ :aruba_networks:ap:arubaos_norma_10.7.1.zip |}}
-----
-{{ :aruba_networks:ap:aos_10.7.1.1-rn.pdf |}}
-{{pdfjs 46em >:aruba_networks:ap:aos_10.7.1.1-rn.pdf}}
-----
-====== ArubaOS_Norma_ArubaOS_Norma_10.8.1.1_96846 ======
-----
-====== Aruba IAP-635 RW Deployment — Knowledge Base ======
-This document describes the full deployment of Aruba IAP-635 (RW regulatory domain) for the South Campus.
-It includes VLAN design, switch configuration, Virtual Controller setup, SSID renaming, verification commands, and troubleshooting references.
-===== Table of Contents =====
-  * [[#network_topology|Network Topology]]
-  * [[#switch_configuration_aruba_6300|Switch Configuration (Aruba 6300)]]
-  * [[#virtual_controller_settings_rw|Virtual Controller Settings (RW Controller)]]
-  * [[#ssid_renaming_rw|SSID Renaming – RW Controller]]
-  * [[#cli_verification_commands|CLI Verification Commands]]
-  * [[#notes_and_recommendations|Notes & Recommendations]]
-----
-===== Network Topology =====
-  * **AP Model:** Aruba IAP-635 (RW)
-  * **Total RW APs:** 4 units
-  * **AP VLAN:** **735**
-  * **AP Backhaul VLAN:** **706**
-  * **RW Virtual Controller IP:** **172.20.76.20**
-  * **Switch:** Aruba 6300 (Access Layer)
-  * **Core:** Aruba 6400 (MDF-1)
-The RW APs should not join the US Virtual Controller due to different regulatory domain (US vs RW).
-Each side operates its own independent Virtual Controller.
-----
-===== Switch Configuration (Aruba 6300) =====
-! ================================
-! Aruba 6300 - AP RW VLAN 735/706
-! ================================
-! -------- AP 172.20.76.24 / AP_59 --------
-  interface 1/1/1
-   description AP_172.20.76.24/_44:12:44:cd:ed:45_635(indoor)_AP_59
-   no shutdown
-   mtu 9100
-   no routing
-   vlan trunk native 735
-   vlan trunk allowed all
-! -------- LINK TO AP (VLAN 706) --------
-  interface 1/1/2
-   description LINK TO AP
-   no shutdown
-   mtu 9100
-   no routing
-   vlan trunk native 706
-   vlan trunk allowed all
-! -------- AP 172.20.76.22 / AP_57 --------
-  interface 1/1/3
-   description AP_172.20.76.22/_44:12:44:cd:f1:05_635(indoor)_AP_57
-   no shutdown
-   mtu 9100
-   no routing
-   vlan trunk native 735
-   vlan trunk allowed all
-! -------- AP 172.20.76.21 / AP_56 --------
-  interface 1/1/4
-   description AP_172.20.76.21/_44:12:44:ce:26:7e_635(indoor)_AP_56
-   no shutdown
-   mtu 9100
-   no routing
-   vlan trunk native 735
-   vlan trunk allowed all
-! -------- LINK TO AP (VLAN 706) --------
-  interface 1/1/5
-   description LINK TO AP
-   no shutdown
-   mtu 9100
-   no routing
-   vlan trunk native 706
-   vlan trunk allowed all
-! -------- AP 172.20.76.23 / AP_58 --------
-  interface 1/1/6
-   description AP_172.20.76.23/_44:12:44:ce:01:d3_635(indoor)_AP_58
-   no shutdown
-   mtu 9100
-   no routing
-   vlan trunk native 735
-   vlan trunk allowed all
-! ============================
-! LAG-1 toward Core 6400 (MDF-1)
-! ============================
-  interface lag 1
-   description Access LAG-1 to MDF-1 - Core 6400
-   no shutdown
-   no routing
-   vlan trunk native 1
-   vlan trunk allowed all
-   lacp mode active
-   loop-protect
-  interface 1/1/49
-   description Access LAG-1 to MDF-1
-   no shutdown
-   mtu 9100
-   lag 1
-  interface 1/1/50
-   description Access LAG-1 to MDF-1
-   no shutdown
-   mtu 9100
-   lag 1
-===== Virtual Controller Settings (RW Controller) =====
-  virtual-controller-country RW
-  virtual-controller-ip 172.20.76.20
-**Verification commands:**
-  show running-config | include virtual
-  show swarm state
-  show swarm leader
-  show aps
-**If Virtual Controller appears as 0.0.0.0, set it manually:**
-  virtual-controller-ip 172.20.76.20
-  commit apply
-===== SSID Renaming – RW Controller =====
-  configure terminal
-  wlan ssid-profile "SFE_WiFi"
-   essid "SFE_WiFi-RW"
-   exit
-  wlan ssid-profile "SFE-Guest-WiFi"
-   essid "SFE-Guest-WiFi-RW"
-   exit
-  wlan ssid-profile "IoT"
-   essid "IoT-RW"
-   exit
-  wlan ssid-profile "SFE_ST"
-   essid "SFE_ST-RW"
-   exit
-  wlan ssid-profile "SFE_Staff"
-   essid "SFE_Staff-RW"
-   exit
-  wlan ssid-profile "SFE_Student"
-   essid "SFE_Student-RW"
-   exit
-  wlan ssid-profile "SFE_Teacher"
-   essid "SFE_Teacher-RW"
-   exit
-  wlan ssid-profile "Couper_Portal"
-   essid "Couper_Portal-RW"
-   exit
-  commit apply
-**Verification:**
-  show network
-  show network <SSID>
-===== CLI Verification Commands =====
-==== AP Health and Radios ====
-  show aps
-  show ap debug system-status
-  show ap name <APNAME> status
-  show ap debug radio-stats
-==== Client/IP Assignment ====
-  show client
-  show client detail <mac-address>
-  show client network <SSID>
-  show ip dhcp binding
-==== WLAN/SSID Validation ====
-  show network
-  show network <SSID>
-  show wlan ssid-profile
-==== VC Cluster and Leadership ====
-  show swarm state
-  show swarm leader
-  show running-config | include virtual
-==== Switch VLAN and MTU ====
-  show vlan port 1/1/x
-  show interface 1/1/x
-  show interface 1/1/x | include MTU
-==== MTU End-To-End Test ====
-  ping 8.8.8.8 size 1472 repeat 5
-===== Notes and Recommendations =====
-  * RW and US APs cannot join the same Virtual Controller cluster because they run different regulatory domains.
-  * RW SSIDs include the “-RW” suffix to avoid SSID duplication inside the same L2/L3 space.
-  * VLAN 735 is used for AP access, VLAN 706 for AP uplinks/mesh/internal management.
-  * Jumbo MTU (9100) is required end-to-end to avoid fragmentation or CAPWAP instability.
-  * Always verify DHCP bindings if clients fail to obtain IP.
-  * Ensure each AP is correctly mapped to its trunk native VLAN.
-----
-----