Differences

This shows you the differences between two versions of the page.

--- aruba_networks:ap:ap_630 [2025/11/19 19:12] – aperez
+++ aruba_networks:ap:ap_630 [2025/11/19 19:15] (current) – [Notes and Recommendations] aperez
@@ Line 92: / Line 92: @@
 ! -------- AP 172.20.76.24 / AP_59 --------
-interface 1/1/1
+  interface 1/1/1
    description AP_172.20.76.24/_44:12:44:cd:ed:45_635(indoor)_AP_59
    no shutdown
@@ Line 101: / Line 101: @@
 ! -------- LINK TO AP (VLAN 706) --------
-interface 1/1/2
+  interface 1/1/2
    description LINK TO AP
    no shutdown
@@ Line 110: / Line 110: @@
 ! -------- AP 172.20.76.22 / AP_57 --------
-interface 1/1/3
+  interface 1/1/3
    description AP_172.20.76.22/_44:12:44:cd:f1:05_635(indoor)_AP_57
    no shutdown
@@ Line 119: / Line 119: @@
 ! -------- AP 172.20.76.21 / AP_56 --------
-interface 1/1/4
+  interface 1/1/4
    description AP_172.20.76.21/_44:12:44:ce:26:7e_635(indoor)_AP_56
    no shutdown
@@ Line 128: / Line 128: @@
 ! -------- LINK TO AP (VLAN 706) --------
-interface 1/1/5
+  interface 1/1/5
    description LINK TO AP
    no shutdown
@@ Line 137: / Line 137: @@
 ! -------- AP 172.20.76.23 / AP_58 --------
-interface 1/1/6
+  interface 1/1/6
    description AP_172.20.76.23/_44:12:44:ce:01:d3_635(indoor)_AP_58
    no shutdown
@@ Line 149: / Line 149: @@
 ! ============================
-interface lag 1
+  interface lag 1
    description Access LAG-1 to MDF-1 - Core 6400
    no shutdown
@@ Line 158: / Line 158: @@
    loop-protect
-interface 1/1/49
+  interface 1/1/49
    description Access LAG-1 to MDF-1
    no shutdown
@@ Line 164: / Line 164: @@
    lag 1
-interface 1/1/50
+  interface 1/1/50
    description Access LAG-1 to MDF-1
    no shutdown
@@ Line 273: / Line 273: @@
 ===== Notes and Recommendations =====
-RW and US APs cannot join the same Virtual Controller cluster because they run different regulatory domains.
+  * RW and US APs cannot join the same Virtual Controller cluster because they run different regulatory domains.
-RW SSIDs include the “-RW” suffix to avoid SSID duplication inside the same L2/L3 space.
+  * RW SSIDs include the “-RW” suffix to avoid SSID duplication inside the same L2/L3 space.
-VLAN 735 is used for AP access, VLAN 706 for AP uplinks/mesh/internal management.
+  * VLAN 735 is used for AP access, VLAN 706 for AP uplinks/mesh/internal management.
-Jumbo MTU (9100) is required end-to-end to avoid fragmentation or CAPWAP instability.
+  * Jumbo MTU (9100) is required end-to-end to avoid fragmentation or CAPWAP instability.
-Always verify DHCP bindings if clients fail to obtain IP.
+  * Always verify DHCP bindings if clients fail to obtain IP.
-Ensure each AP is correctly mapped to its trunk native VLAN.
+  * Ensure each AP is correctly mapped to its trunk native VLAN.
 ----