Differences

This shows you the differences between two versions of the page.

--- aruba_networks:controller:aruba_mobility_controller_7220 [2025/05/21 11:27] – aperez
+++ aruba_networks:controller:aruba_mobility_controller_7220 [2025/09/14 11:30] (current) – aperez
@@ Line 562: / Line 562: @@
 {{pdfjs 46em >aruba_networks:controller:arubaos-8.10.0.16-release-notes.pdf }}
+----
+**{{ :aruba_networks:controller:arubaos-8.12.0.5-release-notes.pdf |Arubaos 8.12.0.5 release notes}}**
+{{pdfjs 46em >aruba_networks:controller:arubaos-8.12.0.5-release-notes.pdf }}
 ----
@@ Line 698: / Line 702: @@
+----
 ----
+{{ :aruba_networks:controller:optimizacion_wlan_aruba_7200_aps_.pdf |}}
+{{pdfjs 46em >aruba_networks:controller:optimizacion_wlan_aruba_7200_aps_.pdf }}
+----
+----
+<code bash>
+show ap radio-summary
+show ap debug system-status ap-name "AP1" | include Power
+show ap arm state ap-name "AP1"
+show ap arm state ap-name "AP1" | include Band|Channel|EIRP
+show ap radio-summary | include "AP1"
+show ap debug system-status ap-name "AP1" | include Power | LLDP
+show ap arm state ap-name "AP1" | include Band|Channel|EIRP
+show ap config ap-name "AP1" | include ap-group
+show ap config ap-name "AP1" | include ap system-profile
+show ap config ap-name "AP1" | include dot11g-radio-profile
+show ap config ap-name "AP1" | include dot11a-radio-profile
+show ap radio-summary | include N/A
+</code>
+----
+----
+{{ :aruba_networks:controller:arm_2_4_ghz_disable_on_wlan_7200_aruba_networks_v3.pdf |}}
+{{pdfjs 46em >aruba_networks:controller:arm_2_4_ghz_disable_on_wlan_7200_aruba_networks_v3.pdf }}
+----
+----
+{{ :aruba_networks:controller:airgroup_wlan_7220.pdf |}}
+{{pdfjs 46em >aruba_networks:controller:airgroup_wlan_7220.pdf }}
+----
+----
+====== Guía Técnica – Aruba 7220 ======
+===== Objetivo =====
+Optimizar rendimiento y estabilidad en SSID críticos mediante:
+  * Conversión de multicast a unicast (DMO).
+  * Definición de tasas mínimas (min rates).
+  * Balanceo de carga por radio (Spectrum Load Balancing).
+  * Control de anchos de canal (ARM).
+  * Desactivación de 2.4 GHz en SSIDs principales.
+  * Verificación de AirGroup (mDNS/Bonjour).
+===== Configuración =====
+==== SSID Profiles ====
+<code>
+(Aruba7220) [mynode] (config) # wlan ssid-profile
+default
+IoT_ssid_prof
+Piney_Portal_ssid_prof
+SFE_ST_ssid_prof
+SFE_Staff_ssid_prof
+SFE_Student_ssid_prof
+SFE_Teacher_ssid_prof
+SFE_WiFi_ssid_prof
+</code>
+==== Virtual AP – Broadcast/Multicast ====
+<code>
+wlan virtual-ap default
+   dynamic-mcast-optimization
+   dynamic-mcast-optimization-thresh 6
+   broadcast-filter arp
+   broadcast-filter all
+</code>
+==== SSID Profile – Minimum Rates ====
+<code>
+wlan ssid-profile default
+   g-basic-rates 12
+   g-tx-rates 12 18 24 36 48 54
+   a-basic-rates 12
+   a-tx-rates 12 18 24 36 48 54
+</code>
+==== RF Profiles ====
+<code>
+(config) # rf dot11a-radio-profile default
+(config) # rf dot11g-radio-profile default
+</code>
+==== Spectrum Load Balancing ====
+<code>
+spectrum-load-balancing
+slb-mode radio
+slb-threshold 20
+slb-update-interval 60
+</code>
+==== 5 GHz Radio Profile ====
+<code>
+(config) # rf dot11a-radio-profile default
+(5GHz radio profile "default") # spectrum-load-balancing
+(5GHz radio profile "default") # slb-mode radio
+(5GHz radio profile "default") # slb-threshold 20
+(5GHz radio profile "default") # slb-update-interval 60
+</code>
+==== 2.4 GHz Radio Profile ====
+<code>
+(config) # rf dot11g-radio-profile default
+(2.4GHz radio profile "default") # spectrum-load-balancing
+(2.4GHz radio profile "default") # slb-mode radio
+(2.4GHz radio profile "default") # slb-threshold 20
+(2.4GHz radio profile "default") # slb-update-interval 60
+</code>
+==== ARM Profiles ====
+<code>
+(config) # rf arm-profile "default"
+(config) # rf arm-profile "default-a"
+(config) # rf arm-profile "default-g"
+   no 80MHz-support
+MHz-allowed-bands all
+show ap arm state ap-name
+</code>
+==== Deshabilitar 2.4 GHz en SSID ====
+<code>
+(config) # wlan ssid-profile default
+(config-ssid)# band-steering-mode prefer-5ghz
+(config-ssid)# g-disable
+</code>
+==== Apagar 2.4 GHz en AP Group ====
+<code>
+(config) # wlan ap-group Piney_Portal_AP-Group
+(config-ap-group)# rf dot11g-radio-profile default
+(config-802.11g-radio)# radio disable
+</code>
+===== Verificación =====
+==== AirGroup ====
+<code>
+show airgroup status
+show airgroup statistics
+show airgroup servers
+show airgroup users
+show airgroup debug
+</code>
+----
+----
+{{ :aruba_networks:controller:80_mhz_and_2_4ghz_disable.pdf |}}
+{{pdfjs 46em >aruba_networks:controller:80_mhz_and_2_4ghz_disable.pdf }}
+----
+----
+**[[https://www.cisco.com/c/en/us/support/docs/quality-of-service-qos/qos-video/212134-Video-Quality-of-Service-QOS-Tutorial.html|Video Quality of Service (QOS) Tutorial]]**
+----
+----
+{{ :networking:wireless_topic:wi-fi_standards:promethean_analisis_en.pdf |Executive Summary with Visual Evidence
+Wi-Fi Performance at 5 GHz (20/40 MHz)}}
+{{pdfjs 46em >:networking:wireless_topic:wi-fi_standards:promethean_analisis_en.pdf}}
+{{ :networking:wireless_topic:wi-fi_standards:promethean_analisis_sp.pdf |Síntesis Ejecutiva con Evidencia Gráfica
+Rendimiento Wi-Fi 5 GHz (20/40 MHz)}}
+{{pdfjs 46em >:networking:wireless_topic:wi-fi_standards:promethean_analisis_sp.pdf}}
+----
+----