Differences

This shows you the differences between two versions of the page.

--- aruba_networks:controller:aruba_mobility_controller_7220 [2025/09/09 08:49] – aperez
+++ aruba_networks:controller:aruba_mobility_controller_7220 [2025/09/14 11:30] (current) – aperez
@@ Line 728: / Line 728: @@
 </code>
+----
+----
 {{ :aruba_networks:controller:arm_2_4_ghz_disable_on_wlan_7200_aruba_networks_v3.pdf |}}
 {{pdfjs 46em >aruba_networks:controller:arm_2_4_ghz_disable_on_wlan_7200_aruba_networks_v3.pdf }}
 ----
 ----
 {{ :aruba_networks:controller:airgroup_wlan_7220.pdf |}}
 {{pdfjs 46em >aruba_networks:controller:airgroup_wlan_7220.pdf }}
@@ Line 748: / Line 743: @@
 ----
-====== Aruba 7220 – Configuración y Verificación ======
+====== Guía Técnica – Aruba 7220 ======
-===== SSID Profiles =====
+===== Objetivo =====
+Optimizar rendimiento y estabilidad en SSID críticos mediante:
+  * Conversión de multicast a unicast (DMO).
+  * Definición de tasas mínimas (min rates).
+  * Balanceo de carga por radio (Spectrum Load Balancing).
+  * Control de anchos de canal (ARM).
+  * Desactivación de 2.4 GHz en SSIDs principales.
+  * Verificación de AirGroup (mDNS/Bonjour).
+===== Configuración =====
+==== SSID Profiles ====
 <code>
 (Aruba7220) [mynode] (config) # wlan ssid-profile
@@ Line 763: / Line 769: @@
 </code>
-===== Virtual AP – Broadcast/Multicast =====
+==== Virtual AP – Broadcast/Multicast ====
 <code>
 wlan virtual-ap default
@@ Line 772: / Line 778: @@
 </code>
-===== SSID Profile – Minimum Rates =====
+==== SSID Profile – Minimum Rates ====
 <code>
 wlan ssid-profile default
@@ Line 781: / Line 787: @@
 </code>
-===== RF Profiles =====
+==== RF Profiles ====
 <code>
 (config) # rf dot11a-radio-profile default
@@ Line 787: / Line 793: @@
 </code>
-===== Spectrum Load Balancing =====
+==== Spectrum Load Balancing ====
 <code>
 spectrum-load-balancing
@@ Line 795: / Line 801: @@
 </code>
-===== 5 GHz Radio Profile =====
+==== 5 GHz Radio Profile ====
 <code>
 (config) # rf dot11a-radio-profile default
@@ Line 804: / Line 810: @@
 </code>
-===== 2.4 GHz Radio Profile =====
+==== 2.4 GHz Radio Profile ====
 <code>
 (config) # rf dot11g-radio-profile default
@@ Line 813: / Line 819: @@
 </code>
-===== ARM Profile =====
+==== ARM Profiles ====
 <code>
 (config) # rf arm-profile "default"
 (config) # rf arm-profile "default-a"
 (config) # rf arm-profile "default-g"
    no 80MHz-support
 MHz-allowed-bands all
@@ Line 824: / Line 830: @@
 </code>
-===== Deshabilitar 2.4 GHz en SSID =====
+==== Deshabilitar 2.4 GHz en SSID ====
 <code>
 (config) # wlan ssid-profile default
@@ Line 831: / Line 837: @@
 </code>
-===== Apagar 2.4 GHz en AP Group =====
+==== Apagar 2.4 GHz en AP Group ====
 <code>
 (config) # wlan ap-group Piney_Portal_AP-Group
@@ Line 838: / Line 844: @@
 </code>
-===== AirGroup – Verificación =====
+===== Verificación =====
+==== AirGroup ====
 <code>
 show airgroup status
@@ Line 858: / Line 866: @@
 ----
+**[[https://www.cisco.com/c/en/us/support/docs/quality-of-service-qos/qos-video/212134-Video-Quality-of-Service-QOS-Tutorial.html|Video Quality of Service (QOS) Tutorial]]**
+----
+----
+{{ :networking:wireless_topic:wi-fi_standards:promethean_analisis_en.pdf |Executive Summary with Visual Evidence
+Wi-Fi Performance at 5 GHz (20/40 MHz)}}
+{{pdfjs 46em >:networking:wireless_topic:wi-fi_standards:promethean_analisis_en.pdf}}
+{{ :networking:wireless_topic:wi-fi_standards:promethean_analisis_sp.pdf |Síntesis Ejecutiva con Evidencia Gráfica
+Rendimiento Wi-Fi 5 GHz (20/40 MHz)}}
+{{pdfjs 46em >:networking:wireless_topic:wi-fi_standards:promethean_analisis_sp.pdf}}
+----
+----