Differences

This shows you the differences between two versions of the page.

--- aruba_networks:switch:6400:6400_configuration_example_script [2025/04/01 12:25] – [Steps to get the support files for both the switches:] aperez
+++ aruba_networks:switch:6400:6400_configuration_example_script [2025/04/20 12:07] (current) – [Steps to get the support files for both the switches:] aperez
@@ Line 2222: / Line 2222: @@
 **For TFTP**:
   Switch# copy support-files all tftp:// Address of Local Server>/support-files.tar.gz vrf default
+  CS-2C-MDFHA-A# copy support-files all tftp://10.56.64.22/support-files.tar.gz vrf default
+  The operation to copy all support files could take a while to complete.
+  Do you want to continue (y/n)? y
+  Collection in progress...
+  Standby management module is not reachable
+  Unable to gather information from the standby management module
+  show tech output collection is in progress...
+  Done
+  Done
+  Attempting to copy...
+    % Total    % Received % Xferd  Average Speed   Time    Time     Time  Current
+                                   Dload  Upload   Total   Spent    Left  Speed
+69.8M    0     0   65 45.6M      0   467k  0:02:32  0:01:40  0:00:52  648k
 Please note on both the above cases you can use the specific VRF (ex, here we have used management VRF), if you do not specify a VRF, then it will take the default VRF
@@ Line 2241: / Line 2266: @@
  USB should be formatted with FAT32 option before inserting to switch.
+----
 ----
-**TFTP**
+====== Images ======
-  CS-2C-MDFHA-A# copy support-files all tftp://10.56.64.22/support-files.tar.gz vrf default
+  CS-2P-MDFHA-B(config-if-vlan)# show images
-  The operation to copy all support files could take a while to complete.
+  ---------------------------------------------------------------------------
+  ArubaOS-CX Primary Image
+  ---------------------------------------------------------------------------
+  Version : FL.10.13.1010
+  Size    : 998 MB
+  Date    : 2024-04-09 00:34:12 UTC
+  SHA-256 : 53bbd1354dd22bffa2df52b22fe8f2dd5cc05a10bcd9ae8c9e01fc93c830d0ec
-  Do you want to continue (y/n)? y
+  ---------------------------------------------------------------------------
-  Collection in progress...
+  ArubaOS-CX Secondary Image
-  Standby management module is not reachable
+  ---------------------------------------------------------------------------
-  Unable to gather information from the standby management module
+  Version : FL.10.09.1050
+  Size    : 872 MB
+  Date    : 2022-09-13 23:40:16 UTC
+  SHA-256 : 631640f32e58f3719f56b36474d02c98666a519fb7775d3b263a36783eaafcfd
+  Default Image : primary
+  Boot Profile Timeout : 5 seconds
-  show tech output collection is in progress...
+  ------------------------------------------------------
-  Done
+  Management Module 1/1 (Active)
+  ------------------------------------------------------
+  Active Image       : primary
+  Service OS Version : FL.01.14.0002
+  BIOS Version       : FL.01.0002
-  Done
+  CS-2P-MDFHA-A# boot system primary
-  Attempting to copy...
+  Default boot image set to primary.
-    % Total    % Received % Xferd  Average Speed   Time    Time     Time  Current
+  Checking if the configuration needs to be saved...
-                                   Dload  Upload   Total   Spent    Left  Speed
-69.8M    0     0   65 45.6M      0   467k  0:02:32  0:01:40  0:00:52  648k
+  Do you want to save the current configuration (y/n)? y
+  The running configuration was saved to the startup configuration.
+  Checking for updates needed to programmable devices...
+  Done checking for updates.
+non-failsafe device(s) also need to be updated.
+  Please run the 'allow-unsafe-updates' command to enable these updates.
+  This will reboot the entire switch and render it unavailable
+  until the process is complete.
+  Continue (y/n)?
 ----
 ----