Differences

This shows you the differences between two versions of the page.

--- aruba_networks:switch:6400:6400_configuration_example_script [2025/04/01 12:26] – [Steps to get the support files for both the switches:] aperez
+++ aruba_networks:switch:6400:6400_configuration_example_script [2025/04/20 12:07] (current) – [Steps to get the support files for both the switches:] aperez
@@ Line 2269: / Line 2269: @@
 ----
+====== Images ======
+  CS-2P-MDFHA-B(config-if-vlan)# show images
+  ---------------------------------------------------------------------------
+  ArubaOS-CX Primary Image
+  ---------------------------------------------------------------------------
+  Version : FL.10.13.1010
+  Size    : 998 MB
+  Date    : 2024-04-09 00:34:12 UTC
+  SHA-256 : 53bbd1354dd22bffa2df52b22fe8f2dd5cc05a10bcd9ae8c9e01fc93c830d0ec
+  ---------------------------------------------------------------------------
+  ArubaOS-CX Secondary Image
+  ---------------------------------------------------------------------------
+  Version : FL.10.09.1050
+  Size    : 872 MB
+  Date    : 2022-09-13 23:40:16 UTC
+  SHA-256 : 631640f32e58f3719f56b36474d02c98666a519fb7775d3b263a36783eaafcfd
+  Default Image : primary
+  Boot Profile Timeout : 5 seconds
+  ------------------------------------------------------
+  Management Module 1/1 (Active)
+  ------------------------------------------------------
+  Active Image       : primary
+  Service OS Version : FL.01.14.0002
+  BIOS Version       : FL.01.0002
+  CS-2P-MDFHA-A# boot system primary
+  Default boot image set to primary.
+  Checking if the configuration needs to be saved...
+  Do you want to save the current configuration (y/n)? y
+  The running configuration was saved to the startup configuration.
+  Checking for updates needed to programmable devices...
+  Done checking for updates.
+non-failsafe device(s) also need to be updated.
+  Please run the 'allow-unsafe-updates' command to enable these updates.
+  This will reboot the entire switch and render it unavailable
+  until the process is complete.
+  Continue (y/n)?
+----
+----