Differences

This shows you the differences between two versions of the page.

--- dell:switch:dell_emc_switch_n3048p [2024/08/03 00:46] – aperez
+++ dell:switch:dell_emc_switch_n3048p [2025/02/20 10:21] (current) – aperez
@@ Line 1: / Line 1: @@
-====== Dell EMC Networking N-Series N1100-ON, N1500, N2000, N2100-ON, N3000, N3000-ON, N3100-ON, and N4000 Switches CLI Reference Guide ======
+====== Dell EMC Networking N-Series N1100-ON, N1500, N2000, N2100-ON, N3000, N3000-ON, N3100-ON, and N4000 Switches ======
+----
+----
+  * DELL-N3048P-S#**show interfaces status | include Up**
+----
+----
+CLI Reference Guide ======
 {{ :aruba_networks:switch:all-products_esuprt_ser_stor_net_esuprt_networking_esuprt_net_fxd_prt_swtchs_networking-n3000-series_user_s-guide11_en-us.pdf |}}
@@ Line 45: / Line 58: @@
 To enable SSH and HTTPS, input the following commands. SSH and HTTPS require the generation of a DSA and an RSA key. HTTPS requires the creation of a certificate.
+  console(config)# no ip ssh server
   console(config)# crypto key generate dsa
   console(config)# crypto key generate rsa
@@ Line 63: / Line 77: @@
   console(config)# ip http secure-certificate 2
   console(config)# no ip http server
   console(config)#end
   console# write
   console# copy running-config startup-config
+**To enable SSH, input the following commands**
+  enable
+  configure
+  Generate both the RSA and DSA keys:
+  no ip ssh server
+  crypto key generate rsa
+  crypto key generate dsa
+  Now, you can enable the SSH server:
+  ip ssh server
+  Optionally: you can also change the default listen port:
+  ip ssh port 22
+  With more recent firmware versions, you are no longer able to change the SSH protocol version. It is now always
+. But if you are still running an older version, you could set the protocol version:
+  ip ssh protocol 2
+  Optionally: after enabling SSH, you can optionally disable Telnet:
+  ip telnet server disable
+  Go back to EXEC mode and write the changes to flash:
+  exit
+  copy running-config startup-config
 ----
@@ Line 666: / Line 708: @@
 ----
 ----
+====== LLDP Enable ======
+  console(config)#lldp med all
+  console(config)#lldp med confignotification all
+  console(config)#show lldp local-device all
+  LLDP Local Device Summary
+  Interface  Port ID               Port Description
+  ---------  --------------------  --------------------
+  Gi1/0/1    Gi1/0/1               SERVICE_TECHNOLO ...
+  Gi1/0/2    Gi1/0/2               SERVICE_TECHNOLO ...
+  Gi1/0/3    Gi1/0/3               SERVICE_TECHNOLO ...
+  Gi1/0/4    Gi1/0/4               SERVICE_TECHNOLO ...
+  Gi1/0/5    Gi1/0/5               SERVICE_TECHNOLO ...
+  Gi1/0/6    Gi1/0/6               LAN-UTM_test_port
+  Gi1/0/7    Gi1/0/7               LAN-UTM_test_port
+  Gi1/0/8    Gi1/0/8               ISP1_test_port
+  Gi1/0/9    Gi1/0/9               ISP1_test_port
+  Gi1/0/10   Gi1/0/10              ISP2_test_port
+  Gi1/0/11   Gi1/0/11              ISP2_test_port
+  Gi1/0/12   Gi1/0/12
+  Gi1/0/13   Gi1/0/13              UTM_LAN_IP_172.1 ...
+  Gi1/0/14   Gi1/0/14              MPLS_IP_192.168. ...
+  Gi1/0/15   Gi1/0/15              UTM_LAN_IP_172.1 ...
+  Gi1/0/16   Gi1/0/16              MPLS_IP_192.168. ...
+  Gi1/0/17   Gi1/0/17
+  Gi1/0/18   Gi1/0/18              MPLS_IP_192.168. ...
+  Gi1/0/19   Gi1/0/19
+  Gi1/0/20   Gi1/0/20              MPLS_IP_192.168. ...
+  Gi1/0/21   Gi1/0/21
+  Gi1/0/22   Gi1/0/22
+  Gi1/0/23   Gi1/0/23
+  Gi1/0/24   Gi1/0/24
+  Gi1/0/25   Gi1/0/25
+  Gi1/0/26   Gi1/0/26
+  Gi1/0/27   Gi1/0/27
+  Gi1/0/28   Gi1/0/28
+  Gi1/0/29   Gi1/0/29
+  Gi1/0/30   Gi1/0/30
+  Gi1/0/31   Gi1/0/31
+  Gi1/0/32   Gi1/0/32
+  Gi1/0/33   Gi1/0/33
+  Gi1/0/34   Gi1/0/34
+  Gi1/0/35   Gi1/0/35
+  Gi1/0/36   Gi1/0/36
+  Gi1/0/37   Gi1/0/37
+  Gi1/0/38   Gi1/0/38
+  Gi1/0/39   Gi1/0/39
+  Gi1/0/40   Gi1/0/40
+  Gi1/0/41   Gi1/0/41              ISP2_OPERATOR_LA ...
+  Gi1/0/42   Gi1/0/42              ISP2_OPERATOR_LA ...
+  Gi1/0/43   Gi1/0/43
+  Gi1/0/44   Gi1/0/44
+  Gi1/0/45   Gi1/0/45              VLAN500_VM_TEST_PORT
+  Gi1/0/46   Gi1/0/46              VLAN500_VM_TEST_PORT
+  Gi1/0/47   Gi1/0/47              UTM_OLD_PORT_WAN ...
+  Gi1/0/48   Gi1/0/48              UTM_OLD_PORT_WAN ...
+  Te1/0/1    Te1/0/1               Core_Aruba_6400_ ...
+  Te1/0/2    Te1/0/2               Core_Aruba_6400_ ...
+  Te1/1/1    Te1/1/1
+  Te1/1/2    Te1/1/2               ISP_PSLightWave_ ...
+  console(config)#
+  console(config)#show lldp remote-device all
+  LLDP Remote Device Summary
+  Local
+  Interface RemID   Chassis ID          Port ID           System Name
+  --------- ------- ------------------- ----------------- -----------------
+  Te1/0/1   16      EC:67:94:F5:69:00   1/3/33              CS-2P-MDFHA-A
+  Te1/0/2   15      EC:67:94:F5:89:00   1/3/33              CS-2P-MDFHA-B
+  Te1/1/2   25      50:C7:09:A6:65:FF   xe-0/1/3            JN2300_StFranc...
+  console(config)#
+----
+----