Differences

This shows you the differences between two versions of the page.

--- hpe:switch:5510:hpe_5510hi_cmw710_r3507_us_release_notes [2021/08/11 09:17] – created aperez
+++ hpe:switch:5510:hpe_5510hi_cmw710_r3507_us_release_notes [2023/07/12 17:32] (current) – aperez
@@ Line 4: / Line 4: @@
 {{ :hpe:switch:5510:hpe_a00117120en_us_hpe_5510hi-cmw710-r3507-us.pdf |}}
+{{ :hpe:switch:5510:5510_hi_7.10.r3507-us.zip |}}
+{{ :hpe:switch:5510:5510hi_7.10.r3507p10_.zip |}}
+You need to download the ipe file, this contains your bin files.
+If you are using a tftp server use following command in your switch:
+   tftp <ipaddress> get <full .ipe file name>
+this will donwload the file in the switch his flash,.
+After that extract the file like this:
+   boot-loader file flash:/<the .ipe file name> slot all main
+After this you will see that the bin files will be extracted, and after a reboot you should be good to go.
+You can check before the reboot, if the correct file as been installed when you do:
+   Display boot-loader
+If you don't want them in your flash anymore you can use following command:
+   delete /unreserved flash:/<file name>
+-----------------
+**password**
+Use password to configure a password for a local user.
+Use undo password to delete the password of a local user.
+  <Sysname> system-view
+  [Sysname] local-user user1 class manage
+  [Sysname-luser-manage-user1] password simple 123456TESTplat&!
+# Set the password of the device management user test in interactive mode.
+  <Sysname> system-view
+  [Sysname] local-user test class manage
+  [Sysname-luser-manage-test] password
+  Password:
+  Confirm :
+# Set the password of the network access user user2 to 123456TESTuser&! in plain text.
+  <Sysname> system-view
+  [Sysname] local-user user2 class network
+  [Sysname-luser-network-user2] password simple 123456TESTuser&!
+-------