Antonio Perez

This page is read only. You can view the source, but not change it. Ask your administrator if you think this is wrong.

======RECOVERY PASSWORD======


**DEVICE:**

====OC NB 142 S/T====

**1.** Enter monitor mode. Restart the computer and when it is uploading press the ESC key several times.

**2.** It should be at the prompt>

**3.** Write the following line


   bt /primary/boot.68k /dummy


**4.** The equipment will restart again, log in with the user
" root" and password "Enter"

**5.** When the computer is up, type the following command //df primary//   (Verify that the file system exists)

**6.**Type the following command //rf primary/system//  (With this what we do is delete this file)


**7**. Perform a reboot to the device. The next time you log in, you must be with the default password. That is, "root" and "enter" as a password.





  1. Monitor enters to the way. Reinitiate the equipment and when this raising
               presses key ESC several times.
  
  2.  Debera to be left in prompt >
  3. Bt writes the following line / primary/boot.68k / dummy



 --- //[[nce@itclatam.com|David Gonzalez]] 2021/04/10 08:41//