Antonio Perez

This page is read only. You can view the source, but not change it. Ask your administrator if you think this is wrong.
======UPGRADE VIA RS232======


The first thing that should be made is to have the file of upgrade of the SuperStack. For the upgrade to the version 2.64, it's necessary to have the following files where XX and YY corresponds to the version number, for this case 2_64:  


  Update.exe  
  Ldr_b02.bin  
  Ldr_b02.err  
  S2sXX_YY.bin (For this case: s2_s02_64.bin)  
  
  
  
Connect the serial port from your PC to the port of the switch using a Cable Null Modem.  
  
Start a DOS session in your PC. He/she can carry out it through the menu of beginning of Windows executing the command command like leave in the following figure:  
   
  
Get into the directory where the files mentioned in the first item of this procedure are located. Execute the following command:  


  Update s2s02_XX.bin [enter] 
  
  
Next, an information message will appear. Turn off the Switch will in this instant, press [enter] to initialize the process of upgrade.  
  
Once you have pressed [enter], wait until the communication speed changes to 19200 and then plug the Switch to the power source.  
  
  
  
Wait until the whole process has finished and never stop this process, this could cause bigger damages in the Switch.  
  
Once the upgrade has finished, enter the main menu of the switch with the user admin and the password "**Enter**"   


Once located in the main menu confirm the new version of the switch entering the command sys dis [enter], like below:  
  
  Menu options: --------------3Com SuperStack II Switch 3300---------  
   bridge - Administer bridging/VLANS  
   ethernet - Administer Ethernet ports  
   feature - Administer system features  
   ip - Administer IP  
   logout - Logout of the Command Line Interface  
   snmp - Administer SNMP  
   system - Administer system-level functions  
    
  Type? for help.  
  -------------------------------------3Com SuperStack II Switch 3300---------  
  Select menu option: sys dis [enter]  
 



-----------------



 --- //[[nce@itclatam.com|David Gonzalez]] 2021/04/15 11:45//