Antonio Perez

This page is read only. You can view the source, but not change it. Ask your administrator if you think this is wrong.

======CONFIGURATION VLAN ON SWITCH 3300======


**1.** Definition of VLANs in the 3300:

At this time there is no VLAN created, only the default one, and VLANs 2 and 3 will be created

**bri vlan cre**

//Follow the next screen://


{{ :3com:switch:1100-3300:configuration:dsgn_228.png?direct&600 |}}

VLAN 2 will have VLAN ID = 2, local ID = 2 and VLAN name = VLAN 2 (These values come by default to choose them).

Add ports 1, 2 and 3 to VLAN 2 with ID 2, and with tagging (these are placed when adding the default ports)

**2.** Repeat for VLAN3, as is (respective ID, tagging)

**3.** The PCs in VLAN 2 must have IP addresses belonging to the same subnet as the VLAN interface to which it is connected.


Example: A PC connects to port 2 of the 3300. Port 2 belongs to VLAN 2. VLAN 2 is defined as gateway 192.168.1.10/255.255.0.0. Then the PC must have the IP address 192.168.x.y / 255.255.0.0, and have the default Gateway (from the PC at 192.168.1.10)


------------------------


 --- //[[nce@itclatam.com|David Gonzalez]] 2021/04/15 12:27//