Antonio Perez

This page is read only. You can view the source, but not change it. Ask your administrator if you think this is wrong.
======RESTORE TO A PREVIOUSLY DEFINED STATE======



The process to perform a reset to a previous state is described in detail below.



    * **Boot**



  ITCORP# boot
   list-image            List available images
   remove-image          Remove image
   rollback              Roll back image
  ITCORP# boot list-image
  X3.0.0.2090
  X2.5.2.6836
  
  ITCORP# boot rollback
  Are you sure? <Y,[N]>:y
  
  


----------------------



  * **Recovery Password**


As soon as "loading" appears write the word 

 //mkey//

  Loading

There are three security levels for specifying user names and passwords:

  Level 0: User names and passwords are unrestricted.
  Level 1: Names must be at least 6 characters long; passwords at least 8.
  Level 2: In addition to level 1 restrictions, passwords must contain:
             - at least 2 alpha characters
             - at least 1 numeric character
             - at least 1 non-alphanumeric character

Please specify a security level to be used for initial super-user name
and password creation.  As super-user, you can modify the security level
later on via Command Line Interface (CLI) or Local Security Manager (LSM).

**Security level [2]:**

Please enter a user name that we will use to create your super-user account.  Spaces are not allowed.


-------------------------------


  * **Rollback**


  ITCORP# snapshot restore
   <name>                Snapshot name
  ITCORP# snapshot lis
  Date        OS Version  DV Version  Model  Restore  Name
  ----        ----------  ----------  -----  -------  ----
  2008-03-01  X3.0.0.2090 2.5.2.7458  X505   no       MARZO 1 2008
  
  ITCORP# snapshot re
  remove                 restore
  ITCORP# snapshot restore 2008-03-01
  





 --- //[[nce@itclatam.com|David Gonzalez]] 2021/04/08 11:45//