Antonio Perez

This page is read only. You can view the source, but not change it. Ask your administrator if you think this is wrong.
=====HP static LACP Trunk Configuration=====

Details
The following defines a trunk as static LACP. The trunk group trk1 is then assigned to VLAN 10 in which an IP address is defined.


  Conf t   
      trunk a1-a6 trk1 lacp   
  vlan 10   
      untagged trk1   
      ip address 10.1.10.1/24   
  exit   

**ProCurve1# show trunk**

  Load Balancing   
  
  Port | Name Type | Group Type   
  ---- + --------- + ----- ----  
  A1   | 100/1000T | Trk1  LACP     
  A2   | 100/1000T | Trk1  LACP   
  A3   | 100/1000T | Trk1  LACP   
  A4   | 100/1000T | Trk1  LACP   
  A5   | 100/1000T | Trk1  LACP   
  A6   | 100/1000T | Trk1  LACP   

**ProCurve1# show lacp**

                      LACP   
  
  PORT LACP    TRUNK PORT   LACP    LACP   
  NUMB ENABLED GROUP STATUS PARTNER STATUS   
  ---- ------- ----- ------ ------- -------   
  A1   Active  Trk1  Up     Yes     Success   
  A2   Active  Trk1  Up     Yes     Success   
  A3   Active  Trk1  Up     Yes     Success   
  A4   Active  Trk1  Up     Yes     Success   
  A5   Active  Trk1  Up     Yes     Success   
  A6   Active  Trk1  Up     Yes     Success 
  
  
//For more information visit the follow link://
  
https://support.hpe.com/hpsc/doc/public/display?docId=emr_na-c02456299