Antonio Perez

This page is read only. You can view the source, but not change it. Ask your administrator if you think this is wrong.
====Problem Description :====

 Error:  **The device is not in the current IRF** 

Product Model # : 4800G 

Software / Firmware version : 5.20 2202 

Fact : Attempting to add an IRF device to a stack, that was previously configured or misconfigured. 

  


Resetting the device back to factory defaults does not remove the IRF number 


  


ERROR: The device is not in the current IRF. 

  

Unable to add a new device to an IRF Stack 



Cause : If a device has been previously configured with an incorrect member ID or does not match the stack member 

ID, the new device will not synchronize with the existing stack. 

Fix : Use the following command to determine the current Member ID 


  


  4800G]dis irf conf 
  
  
   MemberID     NewID     IRF-Port1       IRF-Port2 
  
  
    *4                     4           1                         2 
  
  

----

  

* indicates the device is the master. 


+ indicates the device through which the user logs in. 


  


Undo irf member 4 renumber 


Undo irf member 4 irf-port 1 


Undo irf member 4 irf-port 2 


  


  4800G]dis irf conf 
  
  
   MemberID     NewID     IRF-Port1       IRF-Port2 
  
  
    *4                     1          disable             disable 
  
 

----

 

***** indicates the device is the master. 


 + indicates the device through which the user logs in. 

  

Save 


Reboot 


  


Then issue the commands 


Irf member 1 renumber 3 


Irf member 1 irf-port 1 port 1 


Irf member 1 irf-port 2 port 2 


  

Save 


Reboot 


Connect the new unit to the IRF Stack. 



Id: 755  

Date Created: Tuesday, June 16, 2009   

Modified Date: Wednesday, June 17, 2009   

Language : English   

Best Bet: No