Antonio Perez

This page is read only. You can view the source, but not change it. Ask your administrator if you think this is wrong.
======IRF port configuration example======

XGE1/1/2  [(IRF-port1/2)]    -  	XGE2/1/1 [(IRF-port2/1)]


=====DeviceA - deviceB=====

**XGE1/1/1 - XGE2/1/2**

The final procedure is as follows:


**Device 1:**

  <DeviceA> system-view
  
  [Devicea] irf member 1 renumber 1
  Warning: Renumbering the switch number may result in configuration change or loss.
  Continue? [Y/N]:y
  
  [DeviceA] interface ten-gigabitethernet 1/1/1
  [DeviceA-Ten-GigabitEthernet1/1/2] shutdown
  [DeviceA] interface ten-gigabitethernet 1/1/2
  [DeviceA-Ten-GigabitEthernet1/1/2] shutdown
  [DeviceA] irf-port 1/2
  [DeviceA-irf-port1/2] port group interface ten-gigabitethernet 1/1/1
  [DeviceA-irf-port1/2] port group interface ten-gigabitethernet 1/1/2
  [DeviceA] interface ten-gigabitethernet 1/1/1
  [DeviceA-Ten-GigabitEthernet1/1/1] undo shutdown
  [DeviceA] interface ten-gigabitethernet 1/1/2
  [DeviceA-Ten-GigabitEthernet1/1/2] undo shutdown
  [DeviceA-Ten-GigabitEthernet1/1/2]save itc.cfg
  <DeviceA>reboot
  
  
  [DeviceA] irf-port-configuration active
  
**Device 2:**


  <DeviceB> system-view
  
  [DeviceB] irf member 1 renumber 2
  Warning: Renumbering the switch number may result in configuration change or loss.
  Continue? [Y/N]:y
  
  [DeviceB] interface ten-gigabitethernet 2/1/1
  [DeviceB-Ten-GigabitEthernet1/1/2] shutdown
  [DeviceB] interface ten-gigabitethernet 2/1/2
  [DeviceB-Ten-GigabitEthernet1/1/2] shutdown
  [DeviceB] irf-port 2/1
  [DeviceB-irf-port2/1] port group interface ten-gigabitethernet 2/1/1
  [DeviceB-irf-port2/1] port group interface ten-gigabitethernet 2/1/2
  [DeviceB] interface ten-gigabitethernet 2/1/1
  [DeviceB-Ten-GigabitEthernet2/1/1] undo shutdown
  [DeviceB] interface ten-gigabitethernet 2/1/2
  [DeviceB-Ten-GigabitEthernet2/1/2] undo shutdown
  [DeviceB-Ten-GigabitEthernet2/1/2]save itc.cfg
  <DeviceB>reboot
  
  
   [DeviceB] irf-port-configuration active
   
--------------------------------

XGE1/1/2  [(IRF-port1/2)] - XGE2/1/1 [(IRF-port2/1)]  =  **XGE2/1/2 [(IRF-port2/2)]**


XGE3/1/2  [(IRF-port3/2)]   -  XGE1/1/1  [(IRF-port1/1)] = **XGE3/1/1  [(IRF-port3/1)]**
--------------------
=====DeviceA - deviceB - deviceC=====

**Device 1:**


  [DeviceA] irf member 1 renumber 1
  Warning: Renumbering the switch number may result in configuration change or loss.
  Continue? [Y/N]:y
  
  [DeviceA] interface ten-gigabitethernet 1/1/1
  [DeviceA-Ten-GigabitEthernet1/1/2] shutdown
  [DeviceA] interface ten-gigabitethernet 1/1/2
  [DeviceA-Ten-GigabitEthernet1/1/2] shutdown
  [DeviceA] irf-port 1/2
  [DeviceA-irf-port1/2] port group interface ten-gigabitethernet 1/1/2
  [DeviceA] irf-port 1/1
  [DeviceA-irf-port1/1] port group interface ten-gigabitethernet 1/1/1
  [DeviceA] interface ten-gigabitethernet 1/1/1
  [DeviceA-Ten-GigabitEthernet1/1/1] undo shutdown
  [DeviceA] interface ten-gigabitethernet 1/1/2
  [DeviceA-Ten-GigabitEthernet1/1/2] undo shutdown
  [DeviceA-Ten-GigabitEthernet1/1/2]save itc.cfg
  <DeviceA>reboot
  
  [DeviceA] irf-port-configuration active


**Device 2:** 

  <DeviceB> system-view
  
  [DeviceB] irf member 1 renumber 2
  Warning: Renumbering the switch number may result in configuration change or loss.
  Continue? [Y/N]:y
  
  [DeviceB] interface ten-gigabitethernet 2/1/1
  [DeviceB-Ten-GigabitEthernet1/1/2] shutdown
  [DeviceB] interface ten-gigabitethernet 2/1/2
  [DeviceB-Ten-GigabitEthernet1/1/2] shutdown
  [DeviceB] irf-port 2/1
  [DeviceB-irf-port2/1] port group interface ten-gigabitethernet 2/1/1
  [DeviceB] irf-port 2/2
  [DeviceB-irf-port2/2] port group interface ten-gigabitethernet 2/1/2
  [DeviceB] interface ten-gigabitethernet 2/1/1
  [DeviceB-Ten-GigabitEthernet2/1/1] undo shutdown
  [DeviceB] interface ten-gigabitethernet 2/1/2
  [DeviceB-Ten-GigabitEthernet2/1/2] undo shutdown
  [DeviceB-Ten-GigabitEthernet2/1/2]save itc.cfg
  <DeviceB>reboot
  
  
  [DeviceB] irf-port-configuration active


**Device 3:**

  <DeviceC> system-view
  
  [DeviceC] irf member 1 renumber 3
  Warning: Renumbering the switch number may result in configuration change or loss.
  Continue? [Y/N]:y
  
  [DeviceC] interface ten-gigabitethernet 3/1/1
  [DeviceC-Ten-GigabitEthernet3/1/2] shutdown
  [DeviceC] interface ten-gigabitethernet 3/1/2
  [DeviceC-Ten-GigabitEthernet3/1/2] shutdown
  [DeviceC] irf-port 3/1
  [DeviceC-irf-port2/1] port group interface ten-gigabitethernet 3/1/1
  [DeviceC] irf-port 3/2
  [DeviceC-irf-port3/2] port group interface ten-gigabitethernet 3/1/2
  [DeviceC] interface ten-gigabitethernet 3/1/1
  [DeviceC-Ten-GigabitEthernet3/1/1] undo shutdown
  [DeviceC] interface ten-gigabitethernet 3/1/2
  [DeviceC-Ten-GigabitEthernet3/1/2] undo shutdown
  [DeviceC-Ten-GigabitEthernet3/1/2]save itc.cfg
  <DeviceC>reboot
  
  
  [DeviceC] irf-port-configuration active
  
  
  
 --- //[[nce@itclatam.com|David Gonzalez]] 2021/03/23 13:12//