ITC/3AV WIKI

This page is read only. You can view the source, but not change it. Ask your administrator if you think this is wrong.
====== HP 5500 SWITCHES SERIES - HOW TO CONFIGURE INTELLIGENT RESILIENT FRAMEWORK (IRF) ======

===== Environment =====

**FACT:** HP 5500 Switch Series

**FACT:** Intelligent Resilient Framework (IRF)

===== Questions/Symptoms =====

**SYMPTOM:**What are the step to configure IRF on HP 5500 switches?

===== Cause =====

**CAUSE:** Intelligent Resilient Framework (IRF) is a software virtualization technology. It connects multiple network devices through physical ports and performs necessary configurations. These devices are virtualized into a distributed device. IRF technology extends network control over multiple active switches. Management of a group of IRF enabled switches is consolidated around a single management IP address, which vastly simplifies network configuration and operations. The user can combine as many as nine HP A-series switches to create an ultra-resilient virtual switching fabric comprising hundreds or even thousands of 1GbE or 10GbE switch ports.

===== Answer/Solution =====

FIX:In the following example, switches Rack4sw1 and Rack4sw2 are configured for IRF. Switch Rack4sw1 is configured as member 1 and switch Rack4sw2 is configured as member 2.

{{:hpe:switch:5500:irf_1_-_hvillanueva.png?600|}}

{{:hpe:switch:5500:irf_2_-_hvillanueva.png?1000|}}

{{:hpe:switch:5500:irf_3_-_hvillanueva.png?1000|}}

{{:hpe:switch:5500:irf_4_-_hvillanueva.png?1000|}}

{{:hpe:switch:5500:irf_5_-_hvillanueva.png?1000|}}

{{:hpe:switch:5500:irf_6_-_hvillanueva.png?1000|}}

{{:hpe:switch:5500:irf_7_-_hvillanueva.png?1000|}}