Antonio Perez

This page is read only. You can view the source, but not change it. Ask your administrator if you think this is wrong.
=====Configuration XRN Stack Sw 5500HI=====


====Switch 1:====

  [5500-EI]fabric-port g1/0/51 en
  [5500-EI]fabric-port g1/0/52 en
  [5500-EI]change self-unit to auto-numbering
  [5500-EI]change self-unit to 1
   The unit 1 already exists in fabric.
   Continue? [Y/N] Y
   Info:It is recommended that you reboot the device after you change the unit ID and synchronize the configuration.
   [5500-EI]
   %Apr  2 00:27:23:426 2000 5500-EI FTM/3/FTMCHID:- 1 -Change unitid successful, unit 1 saved UnitID in flash!
   [5500-EI]

//If apply:  [5500-EI] change unit-id <current_unit_number> to <new_unit_number>//

  <5500-EI> fabric save-unit-id
   The unit ID will be saved to the device.
   Are you sure? [Y/N] Y
   Unit 1 saved unit ID successfully.
  <5500-EI>


====Switch 2:====

  [5500-EI]fabric-port g1/0/27 e
  [5500-EI]fabric-port g1/0/28 e
  [5500-EI]change self-unit to auto-numbering
  [5500-EI] hange self-unit to 2
   Info:It is recommended that you reboot the device after you change the unit ID and synchronize the configuration.
  [5500-EI]
  %Apr  8 23:12:16:928 2000 5500-EI FTM/3/FTMCHID:- 1 -Change unitid successful, unit 2 saved UnitID in flash!
  %Apr  8 23:12:18:357 2000 5500-EI IFNET/5/BOARD:- 1 -Board 0 has been removed
  [5500-EI]
  <5500-EI> fabric save-unit-id
   The unit ID will be saved to the device.
   Are you sure? [Y/N] y
   Unit 2 saved unit ID successfully.
  <5500-EI>