Antonio Perez

This page is read only. You can view the source, but not change it. Ask your administrator if you think this is wrong.
**HPE 5510HI-CMW710-R3507-US**

Release Notes

{{ :hpe:switch:5510:hpe_a00117120en_us_hpe_5510hi-cmw710-r3507-us.pdf |}}

{{ :hpe:switch:5510:5510_hi_7.10.r3507-us.zip |}}

{{ :hpe:switch:5510:5510hi_7.10.r3507p10_.zip |}}

You need to download the ipe file, this contains your bin files.

If you are using a tftp server use following command in your switch:

   tftp <ipaddress> get <full .ipe file name>

this will donwload the file in the switch his flash,.

After that extract the file like this: 

   boot-loader file flash:/<the .ipe file name> slot all main

After this you will see that the bin files will be extracted, and after a reboot you should be good to go.

You can check before the reboot, if the correct file as been installed when you do:

   Display boot-loader
   
If you don't want them in your flash anymore you can use following command:

   delete /unreserved flash:/<file name>
   
-----------------
**password**

Use password to configure a password for a local user.

Use undo password to delete the password of a local user.

  <Sysname> system-view
  [Sysname] local-user user1 class manage
  [Sysname-luser-manage-user1] password simple 123456TESTplat&!

# Set the password of the device management user test in interactive mode.

  <Sysname> system-view
  [Sysname] local-user test class manage
  [Sysname-luser-manage-test] password
  Password:
  Confirm :

# Set the password of the network access user user2 to 123456TESTuser&! in plain text.

  <Sysname> system-view
  [Sysname] local-user user2 class network
  [Sysname-luser-network-user2] password simple 123456TESTuser&!

-------