Antonio Perez

This page is read only. You can view the source, but not change it. Ask your administrator if you think this is wrong.
======TRUNK RESTRICTION BY TIME OF DAY======

**Symptoms:** 
  * Time of day trunk group access
    * Restrict outbound trunk access during certain times to use more or fewer trunks   
 





 
**Facts:** 
  * Timed Route  
  * Dial plan  
  * NBX 100
  * SuperStack 3 NBX
 
 
**Fixes:** Premise:  Customer would like to change the amount of available lines that internal phones can dial out on, by time of day, day of week, or manually by use of a button press.  One such reason is that although the customer normally has a high number of outbound calls steadily throughout the day, at certain times (after a radio spot, for example), they need nearly all the lines reserved for incoming, but only for the rush.  There are many permutations of this implication, but all revolve around the same key dial plan setup:

===In NetSet:===
  [  ]  - Create a new Extension List in NetSet, (for example *0009) with the set of trunks to be used during the 
  restricted times.

===In the Dial Plan:===
  [  ]  - If you want this to apply to only some phones, and not all, make a duplicate table in the dial plan and 
  assign only those phones you want to restrict the outbound trunks.
  
  [  ]  - Create a Route, call it "LocalCO_Restricted", using the new extension list you created.
  
  [  ]  - Create a Timed Route.  For the default route, choose the route "LocalCO".  Create one timed route entry 
  for "Other" system mode, which uses the custom route "Timed Trunk Restriction"
  
  [  ]  - In the Table which you wish to have restricted trunk access, for all of the table entries starting with 
  digit 9, change the Route from "LocalCO" to "Timed Trunk Restriction" (the timed route). DO NOT Change the route 
  for 911, or 9911


The controlling factor for when the restricted trunk access will take place can be triggered one of two ways:

  - map a "SYSTEM OTHER" button on one or more phones.  When it is pressed, the restriction is in effect. Blinking button means restriction is active.  Press again to lift the restriction
  - in the Business Hours, you can desginate certain hours/days to be be marked as "OTHER".  If done in the business hours, the use of a button is optional; it can work automatically according to  business hours.





--------------------------------------------------------------------------------
 
Product(s):  NBX  



 --- //[[nce@itclatam.com|David Gonzalez]] 2021/04/13 10:21//