======HOW TO SET UP PORT MIRRORING======


**Goal: **Set up port mirroring

**Symptoms:** how to set up port mirroring /roving analysis  /mirror port's  /monitor port  

 
**Fixes:** Below is an example of creating a mirror group and setting up port mirroring - in this example I have mirrored inbound and outbound traffic going to ethernet  ports 5 through  8 over to ethernet port 10 which is configured as the monitor port 

  [5500-EI]mirroring-group 1 local
  [5500-EI]mirroring-group 1 mirroring-port eth 1/0/5 to eth 1/0/8 both
  [5500-EI]mirroring-group 1 monitor-port eth 1/0/10
  [5500-EI]disp mirroring-group 1
  mirroring-group 1:
      type: local
      status: active
      mirroring port:
          Ethernet1/0/5  both
          Ethernet1/0/6  both
          Ethernet1/0/7  both
          Ethernet1/0/8  both
      monitor port: Ethernet1/0/10
  [5500-EI]
 
 

--------------------------------------------------------------------------------
 
//Note: The 5500 EI supports mirror groups//
 

--------------------------------------------------------------------------------
 
Product(s):  Switch 5500, Switch 5500G  
Sub Product(s): Switch 5500-EI, Switch 5500-EI PWR, Switch 5500-EI SFP, Switch 5500 EI-FX, Switch 5500G-EI  
 

 --- //[[nce@itclatam.com|David Gonzalez]] 2021/03/29 14:37//