=====Recovery Password=====


====Step 1====

1.  ENTER WAY BOOT ROOM.  ELECTRICALLY START THE DEVICE, THE MOMENT THAT APPEARS "STARTING" SIMULTANEOUSLY KEY MARK CTRL-B

Press Ctrl-B to enter Boot Menu... 




    BOOT  MENU
  
  1. Download application file to flash
  2. Select application file to boot
  3. Display all files in flash
  4. Delete file from flash
  5. Modify bootrom password
  6. Enter bootrom upgrade menu
  7. Skip current configuration file
  8. Set bootrom password recovery
  9. Set switch startup mode
  0. Reboot

  Enter your choice(0-9):
  

----


====Step 2====

Choice 7

  Enter your choice(0-9): 7
  The current setting will boot with current configuration file when rebooted.
  Are you sure you want to skip the current configuration file when rebooting? Yes
  or No(Y/N)
   

KEY MARK (Y)

----

====Step 3====

OPTION (0)

  System is rebooting...

----

====Step 4====

ENTER VIA CLI AND APPLY PASSWORD REQUIRED BOTH LOCAL AND GLOBAL

  #
   super password level 1 simple itccol200x
   super password level 2 simple itccol200x
   super password level 3 simple itccol200x
  #
  local-user admin
   service-type lan-access
   service-type telnet terminal
   level 3
  local-user manager
   service-type lan-access
   service-type telnet terminal
   level 2
  local-user monitor
   service-type lan-access
   service-type telnet terminal
   level 1
  #
  user-interface aux 0 7
   authentication-mode scheme
  user-interface vty 0 4
   authentication-mode scheme
  #
 

ctrl +  z

//NOTE:  DO NOT WRITE IN ANY FILE .cfg // 


  >reboot
     please wait......
   Unit 1: Current configuration differs from next startup configuration file.
   Unit 2: Current configuration differs from next startup configuration file.
   This command will reboot the device. Current configuration will be lost in next
   startup if you continue.   Continue? [Y/N] y
   This will reboot device. Continue? [Y/N] y
  <5500G-EI>
  <5500G-EI>
  Starting...... 
  

----

====Step 5====

Press Ctrl-B to enter Boot Menu... 1

password:


    BOOT  MENU
  
  1. Download application file to flash
  2. Select application file to boot
  3. Display all files in flash
  4. Delete file from flash
  5. Modify bootrom password
  6. Enter bootrom upgrade menu
  7. Skip current configuration file
  8. Set bootrom password recovery
  9. Set switch startup mode
  0. Reboot
  
  
  Enter your choice(0-9): 7
  The current setting will boot with current configuration file when rebooted.
  Are you sure you want to skip the current configuration file when rebooting? Yes
  or No(Y/N)N
  

----

====Step 6====

Username:admin
Password:

ENTER WITH THE PASSWORD DESCRIBED IN THE STEP 4

----

====Step 7====

CONFIGURATION BACKUP