======WHY SAVED CONFIGURATION FILE COULD NOT BE LOADED======


User can modify configuration after rebooting; configuration can also be saved; however the switch will not load saved configuration file upon next reboot.
 

**Changes:** Customer performed a password recovery procedure  
 
**Causes:** Once "Skip current configuration file" option is enabled, the switch will ignore any configuration file saved in the flash memory, and factory default configuration file instead, until next time the bootrom is accessed and "Skip current configuration file" disabled  

**Solution:**
Boot room option 7 "Skip current configuration file" enabled "Configuration file is not used." displayed during bootup process  
 

--------------------------------------------------------------------------------
 
  Fixes:  BOOT  MENU


  BOOT MENU
    
  1. Download application file to flash
  2. Select application file to boot
  3. Display all files in flash
  4. Delete file from flash
  5. Modify bootrom password
  6. Enter bootrom upgrade menu
  7. Skip current configuration file
  8. Set bootrom password recovery
  9. Set switch startup mode
  0. Reboot
  
  Enter your choice(0-9): 7
  The current setting is skipping configuration file when reboot.
  Are you sure you want to skip current configuration file when reboot? Yes or No(
  Y/N) y
 

Above action will disable loading of saved configuration file from flash, switch will always reboot into factory setting


  BOOT  MENU
  
  1. Download application file to flash
  2. Select application file to boot
  3. Display all files in flash
  4. Delete file from flash
  5. Modify bootrom password
  6. Enter bootrom upgrade menu
  7. Skip current configuration file
  8. Set bootrom password recovery
  9. Set switch startup mode
  0. Reboot
  
  Enter your choice(0-9): 7
  The current setting is skipping configuration file when reboot.
  Are you sure you want to skip current configuration file when reboot? Yes or No(
  Y/N) n
  Setting......done!

This action will bring the boot load back to normal -- load saved configuration file at next reboot.
 
**Disable "Skip current configuration file"**
 


--------------------------------------------------------------------------------
 
Product(s):  Switch 5500, Switch 5500G  
 

--------------------------------------------------------------------------------
 
Sub Product(s): Switch 5500-SI, Switch 5500-EI, Switch 5500-EI PWR, Switch 5500-EI SFP, Switch 5500 EI-FX, Switch 5500G-EI  


 --- //[[nce@itclatam.com|David Gonzalez]] 2021/03/29 12:07//