It is assumed that the team starts from Factory Defaults.
RAS1500> set system name RAS1500 RAS1500> set command prompt RAS_CSO RAS_CSO> set system transmit RAS1500
RAS_CSO> add ip network red1 address 192.168.1.1/C enable no RAS_CSO> enable ip network red1 RAS_CSO> set ppp receive_authentication pap
RAS_CSO> add modem_GROUP mgr1 intERFACES rm0/slot:2/mod:1
RAS_CSO> add user isp password isp type network,dial_out enable no RAS_CSO> set user isp modem_GROUP mgr1 phone_nuMBER 3080800 RAS_CSO> set network user isp ppp compreSSION_ALGORITHM auto RAS_CSO> set network user isp ipx disABLE applETALK disABLE briDGING disABLE RAS_CSO> set network user isp nat_optioN pat RAS_CSO> set network user isp addRESS_SELECTION negotiate RAS_CSO> set dial_OUT user isp local_ip_ADDRESS 255.255.255.255 RAS_CSO> set user isp idle_TIMEOUT 120 RAS_CSO> set diaL_OUT user isp sitE type ondemand RAS_CSO> set network user isp transmIT_AUTHENTICATION pedroperez@tutopia.com RAS_CSO> set network user isp send_PASSWORD cocos RAS_CSO> set network user isp defauLT_ROUTE_OPTION enable RAS_CSO> add framed_rOUTE user isp ip_route 0.0.0.0 gateway 255.255.255.255 RAS_CSO> enable user isp
RAS_CSO> save all Saving..... SAVE ALL Saving..... SAVE ALL Saving..... SAVE ALL Saving..... SAVE ALL SAVE ALL Complete RAS_CSO>
Note: The lines in red indicate that the values โโof the telephone number, login and password of the account to the ISP, as well as the IP address of the Lan port must be modified to adjust it to the existing configuration in the network.
โ David Gonzalez 2021/04/09 15:15