Lab Guides
The objective of this lab is to get hands on experience deploying a RoCEv2 solution. Unfortunately, at this time not all features required for these solutions are supported within the EVE-NG environment. However, the Lab guide calls those sections out and users should be able to get a good feel of the overall solution even though some features cannot be configured. Stay tuned for updates to this lab as new versions of EVE-NG get produced.
Materials In the attachments you will find:
aos-cx_switch_simualtor_lab_-_data_center_bridging_eve-ng_lab.zip
aos-cx_switch_simualtor_lab_-_data_center_bridging_lab_guide.pdf
Lab Guides
At the end of this workshop, you will be able to implement a configuration for a Data Center 1-Tier Collapsed Core solution using Aruba CX data center switches.
Materials In the attachments you will find:
aos-cx_simulator_lab_-_datacenter_collapsed_core_eve-ng_lab.zip
aos-cx_simulator_lab_-_datacenter_collapsed_core_lab_guide.pdf
Lab Guides
At the end of this workshop, you will be able to implement the basic configurations on a standard switch topology to implement a 2- Tier Data Center switch fabric layer 2. The Key technologies leveraged are VSX supporting multi chassis lag , VSX active gateway
Materials In the attachments you will find:
aos-cx_simulator_lab_-_dcn_2-tier_l2_fabric_eve-ng_lab.zip
aos-cx_simulator_lab_-_dcn_2-tier_l2_fabric_lab_guide.pdf
Lab Guides
At the end of this workshop, you will be able to implement the basic configurations on a standard switch topology to implement a 2- Tier Data Center switch fabric layer 3 leveraging OSPF and iBGP technologies with VSX configurations at the edge of the network. The Key technologies leveraged are OSPF and iBGP as interconnecting the Core and edge switches at L3 with VSX configured on edge switches.
Materials In the attachments you will find:
aos-cx_simulator_lab_-_dcn_2_tier-l3_fabric_ibgp_eve-ng_lab.zip
aos-cx_simulator_lab_-_dcn_2-tier_l3_fabric_ibgp_lab_guide.pdf
Lab Guides
This lab provides an example of configuring and deploying a Spine and Leaf Network Architecture with pairs of VSX Leaf switches at the Server Layer connected to a pair of independent CX Spine switches. The AOS-CX switches to be deployed in production environment would depend on interfaces, scale and features required. Aruba networks provides a diverse product portfolio to meet different customer requirements.
MaterialsIn the attachments you will find:
aos-cx_switch_simulator_-_dcn_layer_3_spine_and_leaf_fabric_with_ospf_and_vxlan_eve-ng_lab.zip
0-notices-hpe_aruba_and_cisco_cli_ref_guide.pdf