Use the show all-timezones command to view all available time zones.
show all-timezones
Use the show date command to view the system date, time, and time zone information.
show date
Use the show dns command to view DNS (Domain Name System) servers.
show dns
The following example of show dns command output displays the DNS servers configured for the current Policy Manager server:
show domain
Use the show fipsmode command to find whether FIPS (Federal Information Processing Standard) mode is enabled or disabled.
Use the show hostname command to view the hostname of the current Policy Manager server.
show hostname
Use the show ip command to view the IPv4, IPv6, and DNS information of the host.
show ip
The following example of the show ip command displays the IPv4, IPv6, and DNS information of the host:
Use the show license command to view the Policy Manager license information.
show license
Use the show ntp command to view the IP addresses of the primary and secondary Network Time Protocol (NTP) servers configured for the current Policy Manager server.
The show ntp command also displays information such as the NTP authentication key details corresponding to the NTP server configured (for example, Key ID and hash algorithm).
show ntp
The show ports command shows the status of all the ports, including any filtering on incoming or outgoing traffic on the particular port. If you use the configure port command to filter inbound or outbout traffic on a selected port, the accept or reject rule assigned to the port will be reflected in the output of this command.
show ports
Use the show sysinfo command to view the node uptime, disk utilization, and memory utilization information:
show sysinfo
Use the show timezone command to view the current system time zone.
show timezone
Use the show version command to view the Policy Manager software version and the hardware model.
show version
The following displays an example of the show version command output:
— Humberto Villanueva 2020/12/01 14:59