HOW TO SET UP PORT MIRRORING

Goal: Set up port mirroring

Symptoms: how to set up port mirroring /roving analysis /mirror port's /monitor port

Fixes: Below is an example of creating a mirror group and setting up port mirroring - in this example I have mirrored inbound and outbound traffic going to ethernet ports 5 through 8 over to ethernet port 10 which is configured as the monitor port

[5500-EI]mirroring-group 1 local
[5500-EI]mirroring-group 1 mirroring-port eth 1/0/5 to eth 1/0/8 both
[5500-EI]mirroring-group 1 monitor-port eth 1/0/10
[5500-EI]disp mirroring-group 1
mirroring-group 1:
    type: local
    status: active
    mirroring port:
        Ethernet1/0/5  both
        Ethernet1/0/6  both
        Ethernet1/0/7  both
        Ethernet1/0/8  both
    monitor port: Ethernet1/0/10
[5500-EI]

Note: The 5500 EI supports mirror groups


Product(s): Switch 5500, Switch 5500G Sub Product(s): Switch 5500-EI, Switch 5500-EI PWR, Switch 5500-EI SFP, Switch 5500 EI-FX, Switch 5500G-EI

David Gonzalez 2021/03/29 14:37