HPE 5510HI-CMW710-R3507-US

Release Notes

hpe_a00117120en_us_hpe_5510hi-cmw710-r3507-us.pdf

5510_hi_7.10.r3507-us.zip

5510hi_7.10.r3507p10_.zip

You need to download the ipe file, this contains your bin files.

If you are using a tftp server use following command in your switch:

 tftp <ipaddress> get <full .ipe file name>

this will donwload the file in the switch his flash,.

After that extract the file like this:

 boot-loader file flash:/<the .ipe file name> slot all main

After this you will see that the bin files will be extracted, and after a reboot you should be good to go.

You can check before the reboot, if the correct file as been installed when you do:

 Display boot-loader
 

If you don't want them in your flash anymore you can use following command:

 delete /unreserved flash:/<file name>
 

—————– password

Use password to configure a password for a local user.

Use undo password to delete the password of a local user.

<Sysname> system-view
[Sysname] local-user user1 class manage
[Sysname-luser-manage-user1] password simple 123456TESTplat&!

# Set the password of the device management user test in interactive mode.

<Sysname> system-view
[Sysname] local-user test class manage
[Sysname-luser-manage-test] password
Password:
Confirm :

# Set the password of the network access user user2 to 123456TESTuser&! in plain text.

<Sysname> system-view
[Sysname] local-user user2 class network
[Sysname-luser-network-user2] password simple 123456TESTuser&!