1. Adding a Lan user to Lan.

add user LAN-ETECEN password chicago type network,dial_out
disable user LAN-ETECEN
set user LAN-ETECEN idle_timeout 300

2. Configuring the user network parameters.

set network user LAN-ETECEN address_selection specified remote_ip_address 78.0.0.2/A
set network user LAN-ETECEN ipx disable appletalk disable bridging disable
set network user LAN-ETECEN send_password chicago default_route_option enable mtu 1514 spoofing enable

3. Setting User Dial-Out Parameters

set dial_out user LAN-ETECEN local_ip_address 78.0.0.1/A    
set dial_out user LAN-ETECEN site type ondemand

4. Configuring user routing parameters

set network user LAN-ETECEN ip_routing both rip ripv2

5. Setting the PPP parameter

set network user LAN-ETECEN PPP compression_algorithm stac max_channels 2 channel_expansion 60 channel_decrement 20

6. Setting the phone number

set user LAN-ETECEN phone_number 0,012162008

7 Configurando la Autentificación

set ppp receive_authentication 
set system transmit_authentication_name LAN-ETECEN

8. Saving the parameters.

Enable user LAN-ETECEN
Save all

— David Gonzalez 2021/04/16 16:19