DEVICE:

1. Enter monitor mode. Restart the computer and when it is uploading press the ESC key several times.

2. It should be at the prompt>

3. Write the following line

 bt /primary/boot.68k /dummy

4. The equipment will restart again, log in with the user “ root” and password “Enter”

5. When the computer is up, type the following command df primary (Verify that the file system exists)

6.Type the following command rf primary/system (With this what we do is delete this file)

7. Perform a reboot to the device. The next time you log in, you must be with the default password. That is, “root” and “enter” as a password.

1. Monitor enters to the way. Reinitiate the equipment and when this raising
             presses key ESC several times.

2.  Debera to be left in prompt >
3. Bt writes the following line / primary/boot.68k / dummy

— David Gonzalez 2021/04/10 08:41