aruba_networks:switch:2530:configuration:hp_static_lacp_trunk_configuration
HP static LACP Trunk Configuration
Details The following defines a trunk as static LACP. The trunk group trk1 is then assigned to VLAN 10 in which an IP address is defined.
Conf t
trunk a1-a6 trk1 lacp
vlan 10
untagged trk1
ip address 10.1.10.1/24
exit
ProCurve1# show trunk
Load Balancing Port | Name Type | Group Type ---- + --------- + ----- ---- A1 | 100/1000T | Trk1 LACP A2 | 100/1000T | Trk1 LACP A3 | 100/1000T | Trk1 LACP A4 | 100/1000T | Trk1 LACP A5 | 100/1000T | Trk1 LACP A6 | 100/1000T | Trk1 LACP
ProCurve1# show lacp
LACP
PORT LACP TRUNK PORT LACP LACP
NUMB ENABLED GROUP STATUS PARTNER STATUS
- — ——- —– —— ——- ——-
A1 Active Trk1 Up Yes Success
A2 Active Trk1 Up Yes Success
A3 Active Trk1 Up Yes Success
A4 Active Trk1 Up Yes Success
A5 Active Trk1 Up Yes Success
A6 Active Trk1 Up Yes Success
For more information visit the follow link:
https://support.hpe.com/hpsc/doc/public/display?docId=emr_na-c02456299
aruba_networks/switch/2530/configuration/hp_static_lacp_trunk_configuration.txt · Last modified: by dgonzalez