User Tools

Site Tools


aruba_networks:using_aos_cx_switch_simulator_lab_overlay

This is an old revision of the document!


AOS-CX Simulator Lab - Static VXLAN

AOS-CX Simulator Lab - Static VXLAN

Lab Guides

This lab will enable the reader to gain hands-on experience with L2 static Virtual Extensible LAN (VXLAN).

Materials In the attachments you o will find:

  • Overview Video
  • Lab Guide
  • EVE-NG Lab Import File

aos-cx_simulator_-_static_vxlan_eve-ng_lab.zip

aos-cx_simulator_-_static_vxlan_lab_guide.pdf



AOS-CX Simulator Lab - VXLAN EVPN

AOS-CX Simulator Lab - VXLAN EVPN

Lab Guides

This lab will enable the reader to gain hands on experience with L2 Virtual Extensible LAN (VXLAN) Ethernet VPN (EVPN).

This lab will allow you to provide end hosts (Virtual PC Simulator - VPCS) on the same subnet with L2 overlay network connectivity across the VXLAN data plane tunnel created by EVPN control plane.

OSPF is used as the IP underlay Interior Gateway Protocol (IGP) to provide loopback connectivity for IBGP peering (AS#65001). IBGP EVPN with Route Reflectors (RRs) are used in this example to prevent the need for full mesh IBGP peers.

Materials In the attachments you will find:

  • Overview Video
  • Lab Guide
  • EVE-NG Lab Import File

aos-cx_switch_simulator_-_vxlan_evpn_eve-ng_lab.zip

aos-cx_switch_simulator_-_vxlan_evpn_lab_guide.pdf



aruba_networks/using_aos_cx_switch_simulator_lab_overlay.1749304642.txt.gz · Last modified: 2025/06/07 08:57 by mzapata

Donate Powered by PHP Valid HTML5 Valid CSS Driven by DokuWiki