dell:switch:dell_emc_switch_n3048p
Table of Contents
Dell EMC Networking N-Series N1100-ON, N1500, N2000, N2100-ON, N3000, N3000-ON, N3100-ON, and N4000 Switches CLI Reference Guide
Setting a management IP address
console> enable console# configure console(config)# interface vlan 1 console(config-if)#ip address 192.168.0.250 255.255.255.0
Here is the same example as above but using the OOB interface:
console(config)# interface out-of-band console(config-if)# ip address 192.168.0.250 255.255.255.0
IP default-gateway
console(config)# ip default-gateway 192.168.0.1
Setting login access on the switch
console> enable console# configure console(config)# username Dell password MYPASSWORD privilege 15 console(config)# enable password ENP@$$w0rd
Choosing Telnet, HTTP, SSH, or HTTPS for management
The default allowed protocols for management are Telnet and HTTP. Telnet and SSH provide command-line based management through a tool such as PuTTY. HTTP and HTTPS provide a UI-based management through a web browser. It is possible to run all four, or none of the protocols. With all the previous options disabled, there is still the option of serial console.
For security, it is recommended to disable Telnet and HTTP, and enable SSH and HTTPS. Telnet and HTTP transfer packets over plain text, meaning if a person is capturing traffic, they can read all commands of functions pushed through the switch when managing it. SSH and HTTPS encrypt the traffic, which strengthens the packet security.
To enable SSH and HTTPS, input the following commands. SSH and HTTPS require the generation of a DSA and an RSA key. HTTPS requires the creation of a certificate.
console(config)# crypto key generate dsa console(config)# crypto key generate rsa console(config)# ip ssh server Note: Caution: Before disabling either telnet or HTTP access, verify SSH or HTTPS access. console(config)# ip telnet server disable console(config)# no ip http secure-server console(config)# crypto certificate 1 generate console(config-crypto-cert)# key-generate console(config-crypto-cert)# exit console(config)# ip http secure-certificate <1 - 2> Instance of the certificate to be activated. console(config)# ip http secure-server Note:This system can generate and store two certificates. To generate the second key, replace the number 1 with 2. To activate the second key, use: console(config)# ip http secure-certificate 2 console(config)# no ip http server console(config)#end console# write console# copy running-config startup-config
To disable Telnet and HTTP input the following commands:
console(config)# ip telnet server disable console(config)# no ip http server
Saving configuration
When satisfied with the configuration, it must be saved so that if the switch reboots, and the configuration is persistent. Input the following command to save your configuration:
console# write memory This operation may take a few minutes. Management interfaces will not be available during this time. Are you sure you want to save? (y/n) y
How to Configure a Static or Dynamic Port-Channel on a Dell Networking N Series switch running OS6 (Dell EMC Networking Switch N3048P)
Creating a dynamic port channel using Link Aggregation Control Protocol (LACP)
Configure the respective interfaces to the appropriate port channel number, 1-128, using the interface range command. This example uses the interfaces tengigabitethernet 1/0/1 and tengigabitethernet 1/0/2:
N-Series> en N-Series# conf N-Series(config)# interface tengigabitethernet 1/0/1 N-Series(config-if)# channel-group 1 mode active N-Series(config-if)# exit N-Series(config)# interface tengigabitethernet 1/0/2 N-Series(config-if)# channel-group 1 mode active
Note: Avoid using all when configuring a port range for port channels. Specify the exact interfaces.
Configure the switchport mode and VLAN membership inside the port channel interface. The below command shows how to enter the port channel interface configuration:
N-Series(config-if)# interface port-channel 1
Verify that the respective port channel is active with the command:
N-Series# show interface port-channel 1
Copy the configuration changes to the startup configuration with the command:
N-Series# copy running-config startup-config This operation may take a few minutes. Management interfaces are not available during this time.
The prompt “Are you sure you want to save?” is seen. Answer (y or n)
Configuration Saved!
Creating a Static port channel
This process differs in only the first step from above - the definition of the channel group mode (on vs active).
N-Series> en N-Series# conf N-Series(config)# interface tengigabitethernet 1/0/1 N-Series(config-if)# channel-group 1 mode on N-Series(config-if)# exit N-Series(config)# interface tengigabitethernet 1/0/2 N-Series(config-if)# channel-group 1 mode on
The remaining steps are identical to the previous section “Creating a dynamic port channel using Link Aggregation Control Protocol (LACP)“
Example code
!Current Configuration: !Software Capability "Stack Limit = 8, VLAN Limit = 1024" !Image File "N3000AdvLitev6.5.3.6" !System Description "Dell EMC Networking N3048P, 6.5.3.6, Linux 3.6.5-e3cd5a07, Not Available" !System Software Version 6.5.3.6 ! configure vlan 500-525 exit vlan 500 name "ServerVM" exit vlan 501 name "ServerStack" exit vlan 502 name "ISP1" exit vlan 503 name "ISP2" exit vlan 504 name "ISP3" exit vlan 505 name "LAN-UTM" exit vlan 506 name "WIFI-AP" exit vlan 507 name "VIP" exit vlan 508 name "ST" exit vlan 509 name "Staff" exit vlan 510 name "Teacher" exit vlan 511 name "Students" exit vlan 512 name "Accounting" exit vlan 513 name "Printer" exit vlan 514 name "AC" exit vlan 515 name "iDRAC" exit vlan 516 name "KVM" exit vlan 517 name "Guest" exit vlan 518 name "VoIP" exit vlan 519 name "IoT" exit vlan 520 name "Cameras" exit vlan 521 name "VC" exit vlan 522 name "VPN" exit vlan 523 name "VLAN523" exit vlan 524 name "VLAN524" exit vlan 525 name "VLAN525" exit ip telnet server disable slot 1/0 5 ! Dell EMC Networking N3048P slot 1/1 6 ! Dell EMC N3000 SFP+ Card stack member 1 5 ! N3048P exit interface out-of-band ip address 192.168.100.21 255.255.254.0 0.0.0.0 exit no ip http server ip http secure-server interface vlan 1 ip address 172.16.28.33 255.255.254.0 exit ip default-gateway 172.16.28.1 username "sd" password 657d6639dcbd9211a547501784b1a559 privilege 15 encrypted username "manager" password 2eb1cf41afd5a5ea20a0bf6c86e81e50 privilege 15 encrypted ip ssh server no spanning-tree application install SupportAssist auto-restart start-on-boot application install hiveagent start-on-boot ! interface Gi1/0/1 storm-control broadcast level 10 storm-control broadcast action trap switchport mode general switchport general acceptable-frame-type tagged-only exit ! interface Gi1/0/2 storm-control broadcast level 10 storm-control broadcast action trap switchport mode general switchport general acceptable-frame-type tagged-only exit ! interface Gi1/0/3 storm-control broadcast level 10 storm-control broadcast action trap switchport mode general switchport general acceptable-frame-type tagged-only exit ! interface Gi1/0/4 storm-control broadcast level 10 storm-control broadcast action trap switchport mode general switchport general acceptable-frame-type tagged-only exit ! interface Gi1/0/5 storm-control broadcast level 10 storm-control broadcast action trap switchport mode general switchport general acceptable-frame-type tagged-only exit ! interface Gi1/0/6 storm-control broadcast level 10 storm-control broadcast action trap switchport mode general switchport general acceptable-frame-type tagged-only exit ! interface Gi1/0/7 storm-control broadcast level 10 storm-control broadcast action trap switchport mode general switchport general acceptable-frame-type tagged-only switchport access vlan 500 exit ! interface Gi1/0/8 storm-control broadcast level 10 storm-control broadcast action trap switchport mode general switchport general acceptable-frame-type tagged-only switchport access vlan 500 exit ! interface Gi1/0/9 storm-control broadcast level 10 storm-control broadcast action trap switchport mode general switchport general acceptable-frame-type tagged-only switchport access vlan 500 exit ! interface Gi1/0/10 storm-control broadcast level 10 storm-control broadcast action trap switchport mode general switchport general acceptable-frame-type tagged-only switchport access vlan 500 exit ! interface Gi1/0/11 storm-control broadcast level 10 storm-control broadcast action trap switchport mode general switchport general acceptable-frame-type tagged-only switchport access vlan 500 exit ! interface Gi1/0/12 storm-control broadcast level 10 storm-control broadcast action trap switchport mode general switchport general acceptable-frame-type tagged-only switchport access vlan 500 exit ! interface Gi1/0/13 storm-control broadcast level 10 storm-control broadcast action trap switchport mode general switchport general acceptable-frame-type tagged-only switchport access vlan 501 exit ! interface Gi1/0/14 storm-control broadcast level 10 storm-control broadcast action trap switchport mode general switchport general acceptable-frame-type tagged-only switchport access vlan 501 exit ! interface Gi1/0/15 storm-control broadcast level 10 storm-control broadcast action trap switchport mode general switchport general acceptable-frame-type tagged-only switchport access vlan 501 exit ! interface Gi1/0/16 storm-control broadcast level 10 storm-control broadcast action trap switchport mode general switchport general acceptable-frame-type tagged-only switchport access vlan 501 exit ! interface Gi1/0/17 storm-control broadcast level 10 storm-control broadcast action trap switchport mode general switchport general acceptable-frame-type tagged-only switchport access vlan 501 exit ! interface Gi1/0/18 storm-control broadcast level 10 storm-control broadcast action trap switchport mode general switchport general acceptable-frame-type tagged-only switchport access vlan 501 exit ! interface Gi1/0/19 storm-control broadcast level 10 storm-control broadcast action trap switchport mode general switchport general acceptable-frame-type tagged-only switchport access vlan 501 exit ! interface Gi1/0/20 storm-control broadcast level 10 storm-control broadcast action trap switchport mode general switchport general acceptable-frame-type tagged-only switchport access vlan 501 exit ! interface Gi1/0/21 storm-control broadcast level 10 storm-control broadcast action trap switchport mode general switchport general acceptable-frame-type tagged-only switchport access vlan 501 exit ! interface Gi1/0/22 storm-control broadcast level 10 storm-control broadcast action trap switchport mode general switchport general acceptable-frame-type tagged-only switchport access vlan 501 exit ! interface Gi1/0/23 storm-control broadcast level 10 storm-control broadcast action trap switchport mode general switchport general acceptable-frame-type tagged-only switchport access vlan 501 exit ! interface Gi1/0/24 storm-control broadcast level 10 storm-control broadcast action trap switchport mode general switchport general acceptable-frame-type tagged-only switchport access vlan 501 exit ! interface Gi1/0/25 storm-control broadcast level 10 storm-control broadcast action trap switchport mode general switchport general acceptable-frame-type tagged-only switchport access vlan 503 exit ! interface Gi1/0/26 storm-control broadcast level 10 storm-control broadcast action trap switchport mode general switchport general acceptable-frame-type tagged-only switchport access vlan 503 exit ! interface Gi1/0/27 storm-control broadcast level 10 storm-control broadcast action trap switchport mode general switchport general acceptable-frame-type tagged-only switchport access vlan 503 exit ! interface Gi1/0/28 storm-control broadcast level 10 storm-control broadcast action trap switchport mode general switchport general acceptable-frame-type tagged-only switchport access vlan 503 exit ! interface Gi1/0/29 storm-control broadcast level 10 storm-control broadcast action trap switchport mode general switchport general acceptable-frame-type tagged-only switchport access vlan 503 exit ! interface Gi1/0/30 storm-control broadcast level 10 storm-control broadcast action trap switchport mode general switchport general acceptable-frame-type tagged-only switchport access vlan 503 exit ! interface Gi1/0/31 storm-control broadcast level 10 storm-control broadcast action trap switchport mode general switchport general acceptable-frame-type tagged-only switchport access vlan 503 exit ! interface Gi1/0/32 storm-control broadcast level 10 storm-control broadcast action trap switchport mode general switchport general acceptable-frame-type tagged-only switchport access vlan 503 exit ! interface Gi1/0/33 storm-control broadcast level 10 storm-control broadcast action trap switchport mode general switchport general acceptable-frame-type tagged-only switchport access vlan 503 exit ! interface Gi1/0/34 storm-control broadcast level 10 storm-control broadcast action trap switchport mode general switchport general acceptable-frame-type tagged-only switchport access vlan 503 exit ! interface Gi1/0/35 storm-control broadcast level 10 storm-control broadcast action trap switchport mode general switchport general acceptable-frame-type tagged-only switchport access vlan 503 exit ! interface Gi1/0/36 storm-control broadcast level 10 storm-control broadcast action trap switchport mode general switchport general acceptable-frame-type tagged-only switchport access vlan 503 exit ! interface Gi1/0/37 storm-control broadcast level 10 storm-control broadcast action trap switchport mode general switchport general acceptable-frame-type tagged-only exit ! interface Gi1/0/38 storm-control broadcast level 10 storm-control broadcast action trap switchport mode general switchport general acceptable-frame-type tagged-only exit ! interface Gi1/0/39 storm-control broadcast level 10 storm-control broadcast action trap switchport mode general switchport general acceptable-frame-type tagged-only exit ! interface Gi1/0/40 storm-control broadcast level 10 storm-control broadcast action trap switchport mode general switchport general acceptable-frame-type tagged-only exit ! interface Gi1/0/41 storm-control broadcast level 10 storm-control broadcast action trap switchport mode general switchport general acceptable-frame-type tagged-only exit ! interface Gi1/0/42 storm-control broadcast level 10 storm-control broadcast action trap switchport mode general switchport general acceptable-frame-type tagged-only exit ! interface Gi1/0/43 storm-control broadcast level 10 storm-control broadcast action trap switchport mode general switchport general acceptable-frame-type tagged-only exit ! interface Gi1/0/44 storm-control broadcast level 10 storm-control broadcast action trap switchport mode general switchport general acceptable-frame-type tagged-only exit ! interface Gi1/0/45 storm-control broadcast level 10 storm-control broadcast action trap switchport mode general switchport general acceptable-frame-type tagged-only exit ! interface Gi1/0/46 storm-control broadcast level 10 storm-control broadcast action trap switchport mode general switchport general acceptable-frame-type tagged-only exit ! interface Gi1/0/47 storm-control broadcast level 10 storm-control broadcast action trap switchport mode general switchport general acceptable-frame-type tagged-only exit ! interface Gi1/0/48 storm-control broadcast level 10 storm-control broadcast action trap switchport mode general switchport general acceptable-frame-type tagged-only exit ! interface Te1/0/1 channel-group 1 mode active storm-control broadcast level 10 storm-control broadcast action trap description "Core_Aruba_6400_switch_connection_IP:_172.16.28.1" switchport mode trunk exit ! interface Te1/0/2 channel-group 1 mode active storm-control broadcast level 10 storm-control broadcast action trap description "Core_Aruba_6400_switch_connection_IP:_172.16.28.1" switchport mode trunk exit ! interface Te1/1/1 storm-control broadcast level 10 storm-control broadcast action trap exit ! interface Te1/1/2 storm-control broadcast level 10 storm-control broadcast action trap exit ! interface port-channel 1 description "Core_Aruba_6400_switch_connection_IP:_172.16.28.1" switchport mode trunk exit snmp-server engineid local 800002a203f8b1565751e4 enable password 2eb1cf41afd5a5ea20a0bf6c86e81e50 encrypted exit
dell/switch/dell_emc_switch_n3048p.txt · Last modified: 2024/08/03 00:46 by aperez