Problem Description :
Error: The device is not in the current IRF
Product Model # : 4800G
Software / Firmware version : 5.20 2202
Fact : Attempting to add an IRF device to a stack, that was previously configured or misconfigured.
Resetting the device back to factory defaults does not remove the IRF number
ERROR: The device is not in the current IRF.
Unable to add a new device to an IRF Stack
Cause : If a device has been previously configured with an incorrect member ID or does not match the stack member
ID, the new device will not synchronize with the existing stack.
Fix : Use the following command to determine the current Member ID
4800G]dis irf conf MemberID NewID IRF-Port1 IRF-Port2 *4 4 1 2
* indicates the device is the master.
+ indicates the device through which the user logs in.
Undo irf member 4 renumber
Undo irf member 4 irf-port 1
Undo irf member 4 irf-port 2
4800G]dis irf conf MemberID NewID IRF-Port1 IRF-Port2 *4 1 disable disable
* indicates the device is the master.
+ indicates the device through which the user logs in.
Save
Reboot
Then issue the commands
Irf member 1 renumber 3
Irf member 1 irf-port 1 port 1
Irf member 1 irf-port 2 port 2
Save
Reboot
Connect the new unit to the IRF Stack.
Id: 755
Date Created: Tuesday, June 16, 2009
Modified Date: Wednesday, June 17, 2009
Language : English
Best Bet: No