hpe:switch:5500:configuration:how_to_use_backup_and_restore_for_a_stack
This is an old revision of the document!
Table of Contents
HOW TO USE BACKUP AND RESTORE FOR A STACK
Fixes:
Backup the Configuration of a working 5500 XRN Stack
<5500G-EI>save The configuration will be written to the device. Are you sure?[Y/N]y Please input the file name(*.cfg)(To leave the existing filename unchanged press the enter key):3comoscfg.cfg Now saving current configuration to the device. Saving configuration. Please wait... .............. Unit1 save configuration flash:/3comoscfg.cfg successfully Unit2 save configuration flash:/3comoscfg.cfg successfully <5500G-EI>backup fabric current-configuration to 151.104.51.89 backup.cfg Backup current configuration to 151.104.51.89. Please wait... File will be transferred in binary mode. Copying file to remote tftp server. Please wait... TFTP: 6308 bytes sent in 5 second(s). File uploaded successfully. Unit 1: Backup current configuration finished! Unit 2: Backup current configuration finished!
Replace Devices and reset the units back to defaults
<5500G-EI>reset saved The saved configuration will be erased. Are you sure?[Y/N]y Configuration in flash memory is being cleared. Please wait ... Unit1 reset saved-configuration successfully. Unit2 reset saved-configuration successfully. <5500G-EI>reboot Start to check configuration with next startup configuration file, please wait...... Unit 1: Current configuration may differs from next startup configuration file. Unit 2: Current configuration may differs from next startup configuration file. This command will reboot the device. Current configuration may be lost in next startup if you continue. Continue? [Y/N] y This will reboot device. Continue? [Y/N] y
Add an IP Address to Interface vlan 1 for connectivity purposes and Restore Config
[5500G-EI]int vlan 1 [5500G-EI-Vlan-interface1]ip add 151.104.212.197 24 [5500G-EI-Vlan-interface1]q <5500G-EI>restore fabr startup-configuration from 151.104.51.89 backup.cfg Restore startup configuration from 151.104.51.89. Please wait... File will be transferred in binary mode. Downloading file from remote tftp server, please wait.......\ | / \ .| / \ | / \ | / \ .. TFTP: 6308 bytes received in 2 second(s). File downloaded successfully. .......... Unit 1: Restore startup configuration finished! Unit 2: Restore startup configuration finished! <5500G-EI> <5500G-EI>dis startup UNIT1: Current Startup saved-configuration file: NULL Next main startup saved-configuration file: flash:/backup.cfg Next backup startup saved-configuration file: NULL Bootrom-access enable state: enabled UNIT2: Current Startup saved-configuration file: NULL Next main startup saved-configuration file: flash:/backup.cfg Next backup startup saved-configuration file: NULL Bootrom-access enable state: enabled <5500G-EI>reboot Start to check configuration with next startup configuration file, please wait...... Unit 1: Current configuration differs from next startup configuration file. Unit 2: Current configuration differs from next startup configuration file. This command will reboot the device. Current configuration will be lost in next startup if you continue. Continue? [Y/N] y This will reboot device. Continue? [Y/N] y #Jan 1 10:03:13:872 2005 5500G-EI COMMONSY/5/REBOOT:- 2 - Reboot Fabric by command.
Save the restored configuration
<5500G-EI>save
hpe/switch/5500/configuration/how_to_use_backup_and_restore_for_a_stack.1617039793.txt.gz · Last modified: 2021/03/29 12:43 by dgonzalez