ITC/3AV WIKI

Recovery Password

Step 1

1. ENTER WAY BOOT ROOM. ELECTRICALLY START THE DEVICE, THE MOMENT THAT APPEARS “STARTING” SIMULTANEOUSLY KEY MARK CTRL-B

Press Ctrl-B to enter Boot Menu…

  BOOT  MENU

1. Download application file to flash
2. Select application file to boot
3. Display all files in flash
4. Delete file from flash
5. Modify bootrom password
6. Enter bootrom upgrade menu
7. Skip current configuration file
8. Set bootrom password recovery
9. Set switch startup mode
0. Reboot

Enter your choice(0-9):

Step 2

Choice 7

Enter your choice(0-9): 7
The current setting will boot with current configuration file when rebooted.
Are you sure you want to skip the current configuration file when rebooting? Yes
or No(Y/N)

KEY MARK (Y)

Step 3

OPTION (0)

System is rebooting...

Step 4

ENTER VIA CLI AND APPLY PASSWORD REQUIRED BOTH LOCAL AND GLOBAL

#
 super password level 1 simple itccol200x
 super password level 2 simple itccol200x
 super password level 3 simple itccol200x
#
local-user admin
 service-type lan-access
 service-type telnet terminal
 level 3
local-user manager
 service-type lan-access
 service-type telnet terminal
 level 2
local-user monitor
 service-type lan-access
 service-type telnet terminal
 level 1
#
user-interface aux 0 7
 authentication-mode scheme
user-interface vty 0 4
 authentication-mode scheme
#

ctrl + z

NOTE: DO NOT WRITE IN ANY FILE .cfg

>reboot
   please wait......
 Unit 1: Current configuration differs from next startup configuration file.
 Unit 2: Current configuration differs from next startup configuration file.
 This command will reboot the device. Current configuration will be lost in next
 startup if you continue.   Continue? [Y/N] y
 This will reboot device. Continue? [Y/N] y
<5500G-EI>
<5500G-EI>
Starting......

Step 5

Press Ctrl-B to enter Boot Menu… 1

password:

  BOOT  MENU

1. Download application file to flash
2. Select application file to boot
3. Display all files in flash
4. Delete file from flash
5. Modify bootrom password
6. Enter bootrom upgrade menu
7. Skip current configuration file
8. Set bootrom password recovery
9. Set switch startup mode
0. Reboot


Enter your choice(0-9): 7
The current setting will boot with current configuration file when rebooted.
Are you sure you want to skip the current configuration file when rebooting? Yes
or No(Y/N)N

Step 6

Username:admin Password:

ENTER WITH THE PASSWORD DESCRIBED IN THE STEP 4

Step 7

CONFIGURATION BACKUP

Table of Contents