hpe:switch:snmp_v3_hpe_comware_cli
This is an old revision of the document!
SNMPv3 configuration example
Network requirements
As shown in Figure 28, the NMS (1.1.1.2/24) uses SNMPv3 to monitor and manage the interface status of the agent (1.1.1.1/24), and the agent automatically sends traps to report events to the NMS.
The NMS and the agent perform authentication when they set up an SNMP session. The authentication algorithm is SHA-1 and the authentication key is 123456TESTauth&!. The NMS and the agent also encrypt the SNMP packets between them by using the AES algorithm and the privacy key 123456TESTencr&!.
hpe/switch/snmp_v3_hpe_comware_cli.1690654831.txt.gz · Last modified: 2023/07/29 13:20 by aperez