ITC/3AV WIKI

This page is read only. You can view the source, but not change it. Ask your administrator if you think this is wrong.

**HOW TO ENABLE HP V1910 / V1920 SECRET COMMANDS**

--I always thought, that the command line of the **Comware OS based 1910/1920 switches** are limited because they are “cheap”. But I found out to enable the full CLI to configure the devices like a 5000-series Switch.

--Enter by CLI command:

**Command:  _cmdline-mode on**

**Password:  512900**

**Password:  Jinhua1920unauthorized**

Hewlett-Packard, known comware-commands:

**_cmdline-mode on**

All commands can be displayed and executed. Continue? [Y/N]y

Please input password:**********************

Warning: Now you enter an all-command mode for developer's testing, some commands may affect operation by wrong use, please carefully use it with our engineer's direction.



{{:hp-advanced-cli.png?600|}}



or for V1920 switch:


{{:hp-advanced-cli-dis_cur.png?600|}}


1920 Switch - User guide:


{{ :hpe:switch:v1920:hpe_c04463799_hpe_officeconnect_1920_switch_series_user_guide.pdf |}}


1920S Switch - User guide:

{{ :hpe:switch:v1920:hpe_a00003478en_us_hpe_officeconnect_1920s_switch_series_management_and_configuration_guide.pdf |}}