This is an old revision of the document!
FACTORY RESET AC AND FAT AP
The guide to factory reset ac and fat ap is shown as below:
I. Requirements
1. Finish reading Device Management –> System Management
2. Login CLI via console, telnet or SSH
II. Configuration Steps
Execute command “dir” to check file system
Ruijie#dir
Mode Link Size MTime Name
——– —- ——— ——————- ——————
1 1600 1970-01-02 01:31:10 config.text
1 11729 2015-06-18 02:03:26 cw_teardown_info.txt
<DIR> 1 0 1970-01-01 00:00:00 dev/
1 33 2015-06-03 00:04:25 dhcp_bind.dat
<DIR> 4 0 1970-01-01 00:00:18 pkistore/
<DIR> 5 0 1970-01-01 00:00:11 portal/
<DIR> 0 0 1970-01-01 00:00:00 proc/
<DIR> 1 0 1970-01-01 00:00:01 ram/
1 1529 2015-03-09 16:31:28 reset.txt
1 8359680 2015-03-09 16:31:26 rgos.bin
<DIR> 2 0 1970-01-01 00:00:08 tmp/
1 150740 1970-01-01 00:00:12 ucs_big5.db
1 239708 1970-01-01 00:00:12 ucs_gb.db
<DIR> 4 0 1970-01-01 00:00:12 web/
1 2766752 1970-01-01 00:00:10 web_management_pack.upd
12 Files (Total size 12243866 Bytes), 7 Directories.
Total 132120576 bytes (126MB) in this device, 115515392 bytes (110MB) available.
“config.text” is configuration file, execute commands “del config.text” to set factory default
Ruijie#del config.text
Are you sure you want to delete “config.text”?[Yes/No]y
Ruijie#reload
Processed with reload? [no]y
After reloading, execute commands “show running-config” to check configuration.