This is an old revision of the document!
Table of Contents
transmission_of_audio_and_video:en_quadhead2go_configuration_guide.pdf
Visionary Solutions, Inc. E4100 • Encoder | D4100 • Decoder
E4100 • Encoder | D4100 • Decoder
Download Java jre-8u261-windows-x64.
25-00186-016_4000_series_firmware_update_guide.pdf
Multicast tester software
Codec video
video_conference_development.pdf
Test commands For equipment: Visionary Solutions, Inc. E4100 • Encoder | D4100 • Decode:
Set MTU (Frame Size) to 1500: http://10.28.197.12/cgi-bin/wapi.cgi?CMD=START&UNIT.ID=ALL&IP.MTU=1500&CMD=END
Set MTU (Frame Size) to 8000 (jumbo frames): http://10.28.197.12/cgi-bin/wapi.cgi?CMD=START&UNIT.ID=ALL&IP.MTU=8000&CMD=END
Query for what frame size unit is set to: http://10.28.197.12/cgi-bin/wapi.cgi?CMD=START&UNIT.ID=ALL&QUERY.KEY=IP.MTU&CMD=END
Color indicates different software version
Firmware for: Visionary Solutions, Inc. E4100 • Encoder | D4100 • Decode
Firmware for: Visionary Solutions, Inc. E4100 • Encoder | D4100 • Decode
E4100 - D4100 Firmware 2.3.169_(First update with this version.)
E4100 - D4100 Firmware 2.3.159_encrypted_(then update with this version.).
Note: The bug is loop display not working with 2.3.169, it is necessary to downgrade to version 2.3.159. Procedure that requires loading version 2.3.169 first and then 2.3.159.
Note: email support: support@visionary-av.com
Note: It is recommended to use Firefox for early update tasks.
Serial recovery to Visionary Solutions, Inc. E4100 • Encoder | D4100 • Decode
(1) Read pages 17 to 19 of the user manual
(5) Connect the wire for DB9 pin 5 to pin 5 on the phoenix connector (6) Connect the wire for DB9 pin 2 to pin 4 on the phoenix connector (7) Connect the wire for DB9 pin 3 to pin 1 on the phoenix connector
Firmware 2.3.159 and TFTP server software
Video Wall Products Matrox QuadHead2Go Series
QuadHead2Go Q155 Multi-Monitor Controller Appliance
Scalable. Flexible. Easy-to-Deploy Video Walls.
Drive up to four Full HD displays from a single video signal—of up to 4Kp60 and 8Kx8K—at full RGB 8:8:8 and YUV 4:4:4 color support. The system-independent Matrox® QuadHead2Go™ Series appliance is designed to power any video wall configuration of any possible dimension, from any video source—reliably delivering flawless image quality across expansive video wall displays. QuadHead2Go’s on-device buttons and pre-set configurations ensure an out-of-the-box, trouble-free installation experience. TAA compliant SKU available.
en_quadhead2go_howto_mount_appliances.pdf
en_quadhead2go_configuration_guide.pdf
For equipment: Visionary Solutions, Inc. E4100 • Encoder | D4100 • Decode; It is necessary to have multicas igmp, snooping, querier, ip igmp and jumbo frame active. Example on Aruba Networks 2930F switch:
igmp reload igmp fastlearn 1/1-1/48,1/51,2/1-2/48,2/51,Trk1 jumbo ip-mtu 9180 jumbo max-frame-size 9198 lldp run lldp enable-notification 1/1-1/24,1/27-1/28,2/1-2/24,2/27-2/28 vlan 1 jumbo ip igmp vlan 500 jumbo ip igmp vlan 501 jumbo ip igmp vlan 502 jumbo ip igmp vlan 503 jumbo ip igmp vlan 504 jumbo ip igmp vlan 505 jumbo ip igmp vlan 506 jumbo ip igmp vlan 507 jumbo ip igmp vlan 508 jumbo ip igmp vlan 509 jumbo ip igmp vlan 510 jumbo ip igmp vlan 511 jumbo ip igmp vlan 512 jumbo ip igmp vlan 513 jumbo ip igmp vlan 514 jumbo ip igmp vlan 515 jumbo ip igmp vlan 516 jumbo ip igmp vlan 517 jumbo ip igmp vlan 518 jumbo ip igmp vlan 519 jumbo ip igmp vlan 520 jumbo ip igmp vlan 521 jumbo ip igmp vlan 522 jumbo ip igmp vlan 523 jumbo ip igmp vlan 524 jumbo ip igmp vlan 525 jumbo ip igmp
Dante AV
One Connection. Endless Possibilities.: Dante is a network platform focusing on AV connectivity that’s easy to use. We enable communication, experiences, inspiration and collaboration to be shared between people and spaces using one connection.
Dante is a network platform focusing on AV connectivity that’s easy to use. We enable communication, experiences, inspiration and collaboration to be shared between people and spaces using one connection.
Dante AV is a networked audio and video (AV) solution developed by Audinate. It allows for the transmission of audio and video signals over standard Ethernet networks, replacing traditional point-to-point connections with a more flexible and scalable system. Here are some key points about Dante AV:
- Unified Platform: Dante AV integrates both audio and video signals into a single network, simplifying the setup and management of AV systems.
- Ease of Use: It uses standard 1 Gbps networks, making it easy to deploy and expand without the need for specialized cabling.
- Interoperability: Dante AV ensures seamless interoperability between devices from different manufacturers, * providing a consistent and reliable user experience.
- Scalability: The system can be easily expanded by adding more devices to the network, similar to how you would add a printer to a computer network.
Dante AV is widely used in various industries, including corporate environments, education, broadcasting, and houses of worship, due to its flexibility and high performance.
USC Universal Sequencing Controller 1 Space Sequencing Controller
Six-step sequencing provided by rackmount USC-6R sequencer, raceway mount MPR-SEQ or stand-alone MPR-SEQ-1C. Provides sequencing to any AC power distribution system that can be controlled by low voltage switch closure. Sequencing may be initiated locally via convenient front panel switch or by any momentary contact closure switch (single pole, double throw, center off). Remote switches are also available. The single rackspace USC-6R rackmount sequencer additionally features an interval delay selector of 1, 3 or 6 seconds between steps andfour different start delay settings to allow up to three USC-6R units to be interconnected to operate as a single, 18-step unit.
- Provides 6-step sequencing to MPR remote power modules
- Can also be used to control the PDC-915R-6 and PDC-915R-2
- Adjustable start delay times
- Adjustable sequence intervals
- Up to 3 units can be joined to provide up to 18 steps of sequencing
Screen Meki vendor
Global Caché - Connect IR, Serial, and Relay to Almost Any Network
Global Caché - Connect IR, Serial, and Relay to Almost Any Network
Connect IR, Serial, and Relay to Almost Any Network, control and automation solutions for commercial, residential, and education markets. We're the glue for the IOT world.
Founded in 2002 by Silicon Valley veterans, Global Caché is an industry pioneer, providing award-winning products that connect electronic devices to a WiFi or wired network so they can be accessed, controlled, and automated.
Our roots may be in the residential market, but our company has expanded over the last two decades to include the commercial and education markets by providing hardware that is easy-to-use and integrate, expanding the reach of automation/control system providers and network-based software to any IR, serial, or relay device. Global Cache's cloud-based IR database, Control Tower, winner of the 2015 CEA Mark of Excellence award, is available for use from our website.
Our products are proudly based on industry standards and open systems, and include published APIs and freely available technical support. With built-in drivers and support from many industry partners, worldwide distribution, and a direct to dealer program, our products are preferred by thousands of installers, integrators, and dealers.
From San Jose, California to Historic Jacksonville, Oregon, Global Caché products are proudly made in the USA.
Transmission of audio and video:datasheet Itach IP
quickstart_itachwf_x1_distrib.pdf
Q-SYS
Q-SYS is an integrated cloud-managed network audio, video and control platform built around a modern, standards-based IT architecture.
q_br_sys_pocketreferenceguide.pdf
q_br_sys_productreferenceguide.pdf
q_dn_qsys_core-ioframetype1_specs.pdf
Q-SYS™ Core Nano – Network I/O Processor
Q-SYS™ Core Nano – Network I/O Processor
The Q-SYS Core Nano audio, video and control (AV&C) processor, which extends the applications of the Q-SYS Ecosystem into a wider range of smaller-scale installations across corporate, higher education, healthcare and beyond. Built on the same foundational technology as the rest of the Q-SYS processor portfolio, including the best-in-class Q-SYS Core 110f, Core Nano is designed for applications with lower network channel capacity and/or targeted processing requirements.
Network I/O
Offering 64 x 64 network audio I/O capacity, the Core Nano was designed to support centralized processing for multiple rooms and/or installations that rely solely on networked, IP-based endpoints (like native Q-SYS devices or Attero Tech by QSC peripherals).
Rightsized. Uncompromised
Rather than deploying an AV&C processor with unused analog I/O that occupies a full rack space, Core Nano offers a smaller, space-efficient solution. However, it does not compromise on functionality; instead it delivers a fully-integrated and customized Q-SYS experience, from paging and background music distribution, to control, automation and beyond (the same feature set as the larger Cores in the processor portfolio).
Optimized for the meeting space
While it can be used across multiple installation types, Core Nano provides the AV infrastructure to enable full-room web conference integration, particularly for larger, more challenging spaces. It features USB integration with all major web conferencing applications, eight channels of acoustic echo cancellation (AEC), two VoIP softphones, Software-based Dante to enable modern microphones, and a full-featured control engine for third-party device integration.
Reduce complexity and improve scalability with the Q-SYS Ecosystem
The Q-SYS Core Nano joins a growing of AV&C processors built on a flexible software foundation that delivers features and functionality without relying on dedicated, single-purpose hardware. Like all Q-SYS Cores, the Core Nano lets integrators take full advantage of the same Q-SYS software suite to design and configure systems while end users can benefit from a more holistic user experience thanks to native Q-SYS peripherals and the system’s ability to scale your system without having to rip-and-replace your configuration file.
Features
- 64 x 64 networked audio channels (Q-LAN / AES67) – no onboard analog audio channel support
- 8 x AEC (acoustic echo cancellation) processors
- up to 32 x 32 Dante audio channels (8 x 8 included)
- USB AV bridging (8 x 8 audio + Q-SYS camera support)
- External USB audio device host
- Supports up to 2 VoIP softphone instances
- Full featured Q-SYS Control engine
- Dual gigabit ethernet ports with assignable application resources offering any combination of VoIP, Q-LAN Control, Q-LAN audio or network redundancy
- Internal power supply
- 1U half-width, includes mounting hardware
Components
- Q-SYS Core Processors
- Q-SYS NV Series Network Video endpoints
- Q-SYS PTZ-IP Conference Cameras
- Q-SYS Touch Screen Control
- Q-SYS I/O-USB Bridge
- Networking Solutions
- Amplifiers
- AcousticDesign Series Loudspeakers
q_dn_core_nano_unleash_wiringdiagrams_meetingroom.pdf
Factory Reset | Core Nano
Discover how to perform a factory reset on the Core Nano device, resetting it to its original settings and resolving any software issues that may be affecting its performance.
Procedure
Use the following steps to reset a Core Nano to its factory default settings:
- Press and hold the ID button on the front of the core for approximately 10 seconds. The BLUE LED should stay lit.
- Wait for the core to complete the reset process and reboot (this will take a few minutes).
Note: The factory reset process will reset the network settings to their default configuration and delete the design and design history, and both the event and system information logs. The network settings that will be reset include everything in the Networking, Access Management, and Reflect tabs in Core Manager, as well as any contact lists configured in the Telephony tab. As softphone information is stored in the design, it will push the softphone configuration to the Core when the design is re-pushed. Likewise, active licenses and media files saved to the Core's hard drive and will persist after a factory reset.
Q-SYS Designer Software v9.10.2
Installing and Updating Q-SYS Software and Firmware
Note: Q-SYS Discovery Protocol (QDP): This is used to discover Q-SYS products on the network by name regardless of IP address. To advertise network presence, one multicast QDP packet is sent every second from Q-SYS peripherals and the PC running Q-SYS Designer Software.
Symetrix
DSP systems for Audio processing and control with audio connection via DANTE network. Symetrix is a DSP systems manufacturer with extensive experience in hardware and software and with a great commitment to the clear objective of expanding the possibilities of its products to cover the audio signal processing and control needs for all types of installations. Its applications provide solutions to all types of installations, from small systems for bars, restaurants, etc. to complex systems for airports, stadiums, train stations, theme parks, etc. The Jupiter series is intended for users who prefer to have access to easy-to-use “app” presets. The other Solus NX series, Prism, Edge and Radius, are programmed through the Composer software that allows access to all the resources of the powerful DSP in the form of open architecture and manage the built-in DANTE network audio interface. Composer also allows you to generate control panel screens so that the end user can have access to personalized parameters for each application.
Sample Design: Multiple Zone House of Worship
symetrix_block-diagram_how_v3-0.pdf