Antonio Perez - aruba_networks:switch:2530:configuration

2530_cli_setting_guide

Anonymous (anonymous@undisclosed.example.com) — 2025-03-10T01:43:32+00:00

2530 CLI setting guide ---------- ---------- Banner banner motd ! This computing system is a XXXXX owned asset and provided for the exclusive use of authorized personnel for technical purposes. All information and data created, accessed, processed, or stored using this system (including personal information) are subject to monitoring, auditing, or review to the extent permitted by applicable law.

comand_line_allow-unsupported-transceiver

Anonymous (anonymous@undisclosed.example.com) — 2021-03-25T21:17:13+00:00

SFP configuration not supported First of all, we must verify that the software version installed in the Switch allows the execution of this command, otherwise it must be addressed to: once downloaded we will proceed to carry out the corresponding software update. Once updated from the configuration terminal, we will execute the following command line.

configuration_example_script_1

Anonymous (anonymous@undisclosed.example.com) — 2021-03-25T21:15:55+00:00

HP-2530-48G-PoEP Running configuration: ; J9772A Configuration Editor; Created on release #YA.16.04.0016 ; Ver #10:19.02.13.98.82.34.61.18.28.f3.84.9c.63.ff.37.27:00 hostname "HP-2530-48G-PoEP" igmp fastlearn 1-52 power-over-ethernet pre-std-detect ports 1-48 ip default-gateway 10.2.0.254 interface 1 poe-lldp-detect enabled exit interface 2 poe-lldp-detect enabled exit interface 3 poe-lldp-detect enabled exit interface 4 poe-lldp-detect enabled exit interface 5 poe-lldp-detect enabled …

configuration_example_script_2

Anonymous (anonymous@undisclosed.example.com) — 2021-03-27T17:39:31+00:00

# version 5.20, Release 1513P62 # sysname HP # dhcp relay server-group 1 ip 172.16.200.1 # domain default enable system # telnet server enable # ip ttl-expires enable # password-recovery enable # igmp-snooping # vlan 1 description Default name Default igmp-snooping enable igmp-snooping querier # vlan 3 description name igmp-snooping enable igmp-snooping querier # vlan 10 description name igmp-snooping enable igmp-snooping querier # vlan 20 description name igmp-snooping e…

configuration_lacp_example

Anonymous (anonymous@undisclosed.example.com) — 2021-03-25T21:27:29+00:00

Switch 2530 LACP Configuration Running configuration: ; J9776A Configuration Editor; Created on release #YA.15.12.0015 ; Ver #05:08.41.ff.37.27:a3 hostname "HP2530" trunk 3-4 trk1 lacp trunk 1-2 trk2 lacp ip default-gateway 192.168.0.254 snmp-server community "public" unrestricted snmp-server contact "Cibercol Informatica Colombiana ltda" location "MERCABOY 161" vlan 1 name "DEFAULT_VLAN" untagged 5-28,Trk1-Trk2 ip address 192.168.0.92 255.255.255.0 exit vlan 10 name "VLAN10" …

how_to_configuration_vlan_by_cli

Anonymous (anonymous@undisclosed.example.com) — 2021-07-29T23:27:49+00:00

How to configuration VLAN by CLI. HP-2530-24G-PoEP# HP-2530-24G-PoEP# con te HP-2530-24G-PoEP(config)# vla 40 HP-2530-24G-PoEP(vlan-40)# tagged 10,17,21,23-24 HP-2530-24G-PoEP(vlan-40)# vlan 100 HP-2530-24G-PoEP(vlan-100)# tagged 10,17,21,23-24 HP-2530-24G-PoEP(vlan-100)# vlan 101 HP-2530-24G-PoEP(vlan-101)# tagged 10,17,21,23-24 HP-2530-24G-PoEP(vlan-101)# vlan 102 HP-2530-24G-PoEP(vlan-102)# tagged 10,17,21,23-24 HP-2530-24G-PoEP(vlan-102)# vlan 103 HP-2530-24G-PoEP(vlan-103)# tagged 10,17,21,…

hp_static_lacp_trunk_configuration

Anonymous (anonymous@undisclosed.example.com) — 2021-03-27T17:19:01+00:00

HP static LACP Trunk Configuration Details The following defines a trunk as static LACP. The trunk group trk1 is then assigned to VLAN 10 in which an IP address is defined. Conf t trunk a1-a6 trk1 lacp vlan 10 untagged trk1 ip address 10.1.10.1/24 exit