Antonio Perez - hpe:switch:5500:configuration

changing_time_control_may_not_remove_qos_rules_at_right

Anonymous (anonymous@undisclosed.example.com) — 2021-03-29T19:24:11+00:00

CHANGING THE TIME CONTROL MAY NOT REMOVE QOS RULES AT THE RIGHT TIME Goals: Changing the time control may not remove QoS rules at the right time System time changed Fixes: The QoS Access list rules can be automatically applied or removed at a specific time of day. If the system time is changed then the time control may not function correctly until the first transition has occured e.g.

enable_super_password_en_vty_and_aux

Anonymous (anonymous@undisclosed.example.com) — 2021-03-29T20:45:42+00:00

SRIPT TO ENABLE SUPER PASSWORD ON VTY AND AUX user-interface aux 0 7 authentication-mode password set authentication password simple 1234567890 idle-timeout 60 0 user-interface vty 0 4 set authentication password simple 1234567890 idle-timeout 60 0

how_to_set_up_port_mirroring

Anonymous (anonymous@undisclosed.example.com) — 2021-03-29T19:40:35+00:00

HOW TO SET UP PORT MIRRORING Goal: Set up port mirroring Symptoms: how to set up port mirroring /roving analysis /mirror port's /monitor port Fixes: Below is an example of creating a mirror group and setting up port mirroring - in this example I have mirrored inbound and outbound traffic going to ethernet ports 5 through 8 over to ethernet port 10 which is configured as the monitor port

how_to_setup_rada_authetication_with_funk

Anonymous (anonymous@undisclosed.example.com) — 2021-03-29T16:28:12+00:00

How to setup rada authentication with Funk Problem: How to setup rada authentication with Funk Cause: The 5500 supports two modes of RADA - Fixed and Username as Mac Address Fix: Fixed Mode: The following commands need to be added to the 5500 MAC-authentication domain demo.local MAC-authentication authmode usernamefixed MAC-authentication authusername RADA MAC-authentication authpassword RADA # radius scheme system radius scheme 8021x server-type standard primary authentication x.x.x.x acco…

how_to_use_backup_and_restore_for_a_stack

Anonymous (anonymous@undisclosed.example.com) — 2021-03-29T22:37:50+00:00

HOW TO USE BACKUP AND RESTORE FOR A STACK Backup the Configuration of a working 5500 XRN Stack <5500G-EI>save The configuration will be written to the device. Are you sure?[Y/N]y Please input the file name(*.cfg)(To leave the existing filename unchanged press the enter key):3comoscfg.cfg Now saving current configuration to the device. Saving configuration. Please wait... .............. Unit1 save configuration flash:/3comoscfg.cfg successfully Unit2 save configuration flash:/3comoscfg…

link_aggretation_4500g-5500g

Anonymous (anonymous@undisclosed.example.com) — 2021-03-29T20:34:25+00:00

HOW TO CONFIGURE LINK AGGREGATION The configuration that must be executed with the 4500G when the remote supports standard LACP. The following command lines must be executed on the 4500G: Example for 3 links: link-aggregation group 1 mode static link-aggregation group 1 description CONEXION-192.168.180.5 link-aggregation group 2 mode static link-aggregation group 2 description CONEXION-4400-192.168.180.27 link-aggregation group 3 mode static link-aggregation group 3 description CONEXION-…

recovery_password

Anonymous (anonymous@undisclosed.example.com) — 2021-03-27T18:45:26+00:00

Recovery Password Step 1 * ENTER WAY BOOT ROOM. ELECTRICALLY START THE DEVICE, THE MOMENT THAT APPEARS “STARTING” SIMULTANEOUSLY KEY MARK CTRL-B Press Ctrl-B to enter Boot Menu... BOOT MENU 1. Download application file to flash 2. Select application file to boot 3. Display all files in flash 4. Delete file from flash 5. Modify bootrom password 6. Enter bootrom upgrade menu 7. Skip current configuration file 8. Set bootrom password recovery 9. Set switch startup mode 0. Reboot

remove_stp_edge_port_and_jumbo_frame

Anonymous (anonymous@undisclosed.example.com) — 2021-03-27T18:52:58+00:00

Remove STP Edge Port and Jumbo frame Below you will find information regarding the correct removal of STP EDGE and Jumbo Frame %Jan 7 23:46:31:903 2005 SW_CORE_DATA_CENTER SHELL/5/LOGIN:- 3 - admin(172 .71) in unit3 login #Jan 7 23:47:00:811 2005 SW_CORE_DATA_CENTER ARP/5/DUPIP:- 3 -IP address 1 .0.69 collision detected, sourced by 001a-a0bd-c9d1 on GigabitEthernet3/0/2 VLAN1 and 0011-2536-dca2 on GigabitEthernet1/0/3 of VLAN1 %Jan 7 23:47:00:813 2005 SW_CORE_DATA_CENTE…

why_saved_configuration_file_could_not_be_loaded

Anonymous (anonymous@undisclosed.example.com) — 2021-03-29T17:09:50+00:00

WHY SAVED CONFIGURATION FILE COULD NOT BE LOADED User can modify configuration after rebooting; configuration can also be saved; however the switch will not load saved configuration file upon next reboot. Changes: Customer performed a password recovery procedure