https://wiki.3av.us/ 2026-04-18T19:23:23+00:00 https://wiki.3av.us/ https://wiki.3av.us/lib/exe/fetch.php?media=wiki:logo.png text/html 2020-09-18T03:05:31+00:00 Anonymous (anonymous@undisclosed.example.com) https://wiki.3av.us/doku.php?id=ruijie:switch:access-or_trunk_port&rev=1600398331&do=diff ACCESS OR TRUNK PORT Note：By default , trunk port carries traffic for all vlans that is created , and we strongly recommend you to prune every trunk port to allow only the traffic of useful vlan pass through in case that unknown unicast ,broadcast and multicast packets floods through the overall network ,leading to a heavier CPU burden and useless consumption of system resource. text/html 2020-09-22T23:48:16+00:00 Anonymous (anonymous@undisclosed.example.com) https://wiki.3av.us/doku.php?id=ruijie:switch:clock&rev=1600818496&do=diff Ruijie>enable Ruijie#configure terminal ------ "" >enter global configuration mode " CCF(config)#clock timezone bogota -5 ------ "" >set timezone to UTC -5 00:08:25:40: %SYS-5-CLOCKUPDATE: Set time zone: bogota (GMT-05:00) text/html 2020-09-24T01:15:25+00:00 Anonymous (anonymous@undisclosed.example.com) https://wiki.3av.us/doku.php?id=ruijie:switch:common_verification_command&rev=1600910125&do=diff COMMON VERIFICATION COMMAND Ruijie#show running-config | begin interface GigabitEthernet 0/18 Ruijie#show running-config | include interface GigabitEthernet 0/18 Ruijie#show interfaces description Ruijie# show interface status Ruijie# show aggregatePort summary text/html 2020-09-18T03:03:24+00:00 Anonymous (anonymous@undisclosed.example.com) https://wiki.3av.us/doku.php?id=ruijie:switch:configuring_a_layer_2_port&rev=1600398204&do=diff PORT DESCRIPTION Function Overview Port description is very important for daily maintenance and trouble shooting. We suggest you to use the format “Link-peer name-peer port” to define port description. For example: Ruijie(config-if-GigabitEthernet 0/1)#description Link-to-WLZX text/html 2020-09-18T02:39:05+00:00 Anonymous (anonymous@undisclosed.example.com) https://wiki.3av.us/doku.php?id=ruijie:switch:copying_log_to_flash&rev=1600396745&do=diff COPYING LOG TO FLASH I. Requirements * Copy logs with a severity higher than debugging in the flash ,then set size of each log file to 128Kbytes. * Set size of log buffer to 128Kbytes. * Record action when user logs in and operates. * Add system name , sequence number and time stamps to each log entry. text/html 2020-09-18T02:46:26+00:00 Anonymous (anonymous@undisclosed.example.com) https://wiki.3av.us/doku.php?id=ruijie:switch:copying_log_to_server&rev=1600397186&do=diff COPYING LOG TO SERVER I. Requirements Copy logs with severity from 0 to 7 to syslog server. II. Network Topology III. Configuration Tips Timestamps and sequence number features must be enabled before system copys logs to log server IV. Configuration Steps text/html 2020-10-04T00:11:52+00:00 Anonymous (anonymous@undisclosed.example.com) https://wiki.3av.us/doku.php?id=ruijie:switch:distribution_switch_is_the_user_gateway_which_have_enabled_dhcp_relay&rev=1601770312&do=diff DISTRIBUTION SWITCH IS THE USER GATEWAY WHICH HAVE ENABLED DHCP RELAY Core switch acts as DHCP Server.Connect core switch and distribution switch through Layer 3 link. Network Topology Configuration Tips * Enable DHCP relay on distribution switch text/html 2020-09-23T01:41:44+00:00 Anonymous (anonymous@undisclosed.example.com) https://wiki.3av.us/doku.php?id=ruijie:switch:general_configuration_switch_l2&rev=1600825304&do=diff ---------- CCF# clock set 18:55:00 09 17 2020 Ruijie#show clock Ruijie(config)#ntp master Ruijie(config)#ntp server 192.168.2.1 ------ "" >set NTP server IP address " Ruijie(config)#ntp update-calendar ------>allow system to save clock in hardware even power interruption text/html 2020-09-18T02:28:10+00:00 Anonymous (anonymous@undisclosed.example.com) https://wiki.3av.us/doku.php?id=ruijie:switch:hostname&rev=1600396090&do=diff CONFIGURING HOSTNAME By default, system name is “Ruijie mostly, the example shows how to configure the system name: Ruijie>en Ruijie#configure terminal Ruijie(config)#hostname Switch ------>change name to "Switch" Switch(config)#end Switch#write text/html 2020-09-22T23:55:13+00:00 Anonymous (anonymous@undisclosed.example.com) https://wiki.3av.us/doku.php?id=ruijie:switch:ntp&rev=1600818913&do=diff NTP Overview Network Time Protocol (NTP) is designed for time synchronization on network devices. A device can synchronize its clock source and the server. Moreover, the NTP protocol can provide precise time correction (less than one millisecond on the text/html 2020-09-24T03:51:19+00:00 Anonymous (anonymous@undisclosed.example.com) https://wiki.3av.us/doku.php?id=ruijie:switch:optical_module_anti-fake_detection_principle&rev=1600919479&do=diff OPTICAL MODULE ANTI-FAKE DETECTION PRINCIPLE 1.3.15 opticalmodule anti-fake detection This function is used to detect whether the optical module used on the Ruijie device is Ruijie original optical module. Non-Ruijie original certified optical module quality can not be guaranteed, resulting in user data communication quality is affected. Optical module anti-fake detection function is used to identify this risk, when the non-Ruijie original certified optical module insert into the Ruijie equ… text/html 2020-09-22T21:36:23+00:00 Anonymous (anonymous@undisclosed.example.com) https://wiki.3av.us/doku.php?id=ruijie:switch:recovery_password_by_bootloader&rev=1600810583&do=diff Recovery password Press a key Ctrl+C Press a key to run the command: BootLoader Menu(“Ctrl+Z” to upper level) TOP menu items. 0. Tftp utilities. 1. XModem utilities. 2. Run main. 3. SetMac utilities. 4. Scattered utilities. 5. Set Module Serial text/html 2020-09-23T01:45:05+00:00 Anonymous (anonymous@undisclosed.example.com) https://wiki.3av.us/doku.php?id=ruijie:switch:show_command_list&rev=1600825505&do=diff Ruijie#show running-config | include interface GigabitEthernet 0/18 Ruijie#show interfaces description Ruijie# show interface status Ruijie# show aggregatePort summary Ruijie# show interfaces aggregatePort 1 Ruijie# show aggregatePort load-balance text/html 2020-09-18T03:23:36+00:00 Anonymous (anonymous@undisclosed.example.com) https://wiki.3av.us/doku.php?id=ruijie:switch:snmp&rev=1600399416&do=diff SNMP SNMPV1/V2 Overview SNMP：As the abbreviation of Simple Network Management Protocol, SNMP has been a network management standard (RFC1157) since the August, 1988. So far, the SNMP becomes the actual network management standard for the support from many manufacturers. It is applicable to the situation of interconnecting multiple systems from different manufacturers. Administrators can use the SNMP protocol to query information, configure network, locate failure and plan capacity for the node… text/html 2020-09-23T01:33:28+00:00 Anonymous (anonymous@undisclosed.example.com) https://wiki.3av.us/doku.php?id=ruijie:switch:storm_control&rev=1600824808&do=diff STORM CONTROL Overview * We suggest you to apply storm-control on edge port on access switch and Don't apply storm-control on uplink port. * If access switch doesn't support storm-control , we suggest you to apply storm-control on distribution switch.