Antonio Perez - unifi_network
https://wiki.3av.us/
2026-05-01T23:26:16+00:00Antonio Perez
https://wiki.3av.us/
https://wiki.3av.us/lib/exe/fetch.php?media=wiki:logo.pngtext/html2023-07-27T17:36:00+00:00Anonymous (anonymous@undisclosed.example.com)cli_1
https://wiki.3av.us/doku.php?id=unifi_network:cli_1&rev=1690479360&do=diff
!Current Configuration:
!
!System Description "US-48-500W, 6.5.32.14509, Linux 3.6.5"
!System Software Version "6.5.32.14509"
!System Up Time "0 days 0 hrs 14 mins 22 secs"
!Additional Packages QOS,IPv6 Management
!
network parms 0.0.0.0 0.0.0.0 0.0.0.0
snmp-server port 0
vlan database
exit
configure
line console
exit
line telnet
exit
spanning-tree mode rstp
snmp-server sysname "US-48-500W"
!
no snmp-server community "public"
no snmp-…text/html2025-05-02T23:44:34+00:00Anonymous (anonymous@undisclosed.example.com)cli_2
https://wiki.3av.us/doku.php?id=unifi_network:cli_2&rev=1746229474&do=diff
//////////////////////////////
# telnet localhost
User> ubnt / password> ubnt
Entering character mode
Escape character is '^]'.
Warning!
The changes may break controller settings and only be effective until reboot.
(UBNT) >enable
(UBNT) # set-inform http://10.210.108.66:8080/inform
//////////////////////
comandos de apoyo>
#show running-config interface 0/3
#show running-config
//////////////////////
(UBNT) #configure
(UBNT) (Config)#interface 0/3
(UBNT) (Interface 0/3)#vlan …text/html2023-07-27T17:39:01+00:00Anonymous (anonymous@undisclosed.example.com)cli_3
https://wiki.3av.us/doku.php?id=unifi_network:cli_3&rev=1690479541&do=diff
(UBNT) #show running-config
!Current Configuration:
!
!System Description "US-48-500W, 6.5.32.14509, Linux 3.6.5"
!System Software Version "6.5.32.14509"
!System Up Time "0 days 2 hrs 27 mins 43 secs"
!Additional Packages QOS,IPv6 Management
!
network parms 172.16.4.5 255.255.254.0 172.16.4.1
snmp-server port 0
vlan database
vlan 500-524
exit
configure
line console
exit
line telnet
exit
spanning-tree mode stp
snmp-server sysname "US-48-500W"
!
no snmp-server community "public"
n…text/html2025-05-08T14:24:46+00:00Anonymous (anonymous@undisclosed.example.com)unifi-installer
https://wiki.3av.us/doku.php?id=unifi_network:unifi-installer&rev=1746714286&do=diff
Unifi-installer
[Donwloas Unifi Virtual WLC.]
----------
----------
To factory reset a Ubiquiti UAP-AC-Lite access point, you have two primary methods: Hardware Reset (Physical Button) and Software Reset (via UniFi Controller).
Method 1: Hardware Reset (Physical Button)
This is the most straightforward method and works even if you cannot access the UniFi Controller.