3com:wireless:ap:configuration:how_to_install_the_print_server
Differences
This shows you the differences between two versions of the page.
| Both sides previous revisionPrevious revision | |||
| 3com:wireless:ap:configuration:how_to_install_the_print_server [2021/04/06 12:05] – dgonzalez | 3com:wireless:ap:configuration:how_to_install_the_print_server [2021/04/06 12:07] (current) – dgonzalez | ||
|---|---|---|---|
| Line 1: | Line 1: | ||
| ======HOW TO INSTALL THE PRINT SERVER: | ======HOW TO INSTALL THE PRINT SERVER: | ||
| - | The Print Server 3CRWPS10072 is shipped with no default IP address. You are required to run a Discovery Utility that is shipped on the CD in order to configure the Print Server with an IP address and in addition select whether you would like the Print Server to work in Ad Hoc Mode i.e. NIC to Server or in Access Point mode i.e. part of the infrastructure LAN) | + | The Print Server 3CRWPS10072 is shipped with no default IP address. You are required to run a Discovery Utility that is shipped on the CD in order to configure the Print Server with an IP address and in addition select whether you would like the Print Server to work in Ad Hoc Mode i.e. NIC to Server or in Access Point mode i.e. part of the infrastructure LAN |
| If you have a DHCP server on your LAN, the Print Server can obtain an IP address from the DHCP Server. However, it is advised that you discover it and assign a fixed IP address. | If you have a DHCP server on your LAN, the Print Server can obtain an IP address from the DHCP Server. However, it is advised that you discover it and assign a fixed IP address. | ||
3com/wireless/ap/configuration/how_to_install_the_print_server.1617728738.txt.gz · Last modified: 2021/04/06 12:05 by dgonzalez