Differences

This shows you the differences between two versions of the page.

--- ruijie:controller:access_point_provisioning [2020/12/01 01:20] – hvillanueva
+++ ruijie:controller:access_point_provisioning [2020/12/01 13:13] (current) – hvillanueva
@@ Line 20: / Line 20: @@
 In the next step, a Wi-Fi network (SSID) must be configured by obligation. You configure a network name, password, and the corresponding VLAN for that network.
+{{:ruijie:controller:access_point_provisioning_4_-_hvillanueva.jpg?600|}}
 ===== 3. Ruijie Switch Port Configuration and Testing =====
+For the switches, the ports necessary for access point connectivity are configured. It is important that the port is trunked and follows the VLANs that would be used by each established Wi-Fi network and other networks and the native VLAN must be the management VLAN of the access points and the controller (VLAN 521). In the following image a Switch is configured with the IP 10.1.0.11 in one of the ports.
+{{:ruijie:controller:access_point_provisioning_5_-_hvillanueva.jpg?600|}}
+After configuring the port of the Switch, in the controller we see that the Access Point goes up and the location is changed to identify where the Access Point is connected to the corresponding Switch.
+{{:ruijie:controller:access_point_provisioning_6_-_hvillanueva.jpg?600|}}
+{{:ruijie:controller:access_point_provisioning_7_-_hvillanueva.jpg?600|}}´
+Likewise, the same configuration of another Ruijie Switch is made and it is checked on the controller that the Access Point has uploaded.
+{{:ruijie:controller:access_point_provisioning_8_-_hvillanueva.jpg?600|}}
+{{:ruijie:controller:access_point_provisioning_9_-_hvillanueva.jpg?600|}}
+{{:ruijie:controller:access_point_provisioning_10_-_hvillanueva.jpg?600|}}
+ --- //[[ing.hvillanueva@gmail.com|Humberto Villanueva]] 2020/12/01 13:12//