In this network scenario, we configure a Wi-Fi network with Ruijie's solution but with a Ruijie Gateway where all the wireless network configurations will be performed. This Gateway also fulfills the functions of a Controller (WLC) where we can provision the Ruijie Access Points and manage them. Likewise, from the Gateway, the SSIDs, VLANs and other parameters such as transmission channels are configured.

For this scenario, a wireless network will be configured with two SSIDs and their respective VLAN. Likewise, the Ruijie AP will be connected to the Gateway and provisioned to take the wireless network configurations established from the Gateway.

In this topology, it indicates that the connection from the Gateway to the Router is connected to the WAN port of the same for Internet access and the other LAN ports will connect a computer and the Access Point.

Finishing the configuration, we access the Gateway Dashboard where we can see the Gateway information.

The following table shows the IP addressing of the devices for this scenario.

Also, the following table mentions the wireless networks that will be configured in this scenario with their respective VLANs.

To start the configuration, we connect the Gateway to the Internet through the WAN port, the AP Ruijie in one of the LAN ports as well as the computer. After making the connections, from the computer we access the Gateway via the web at 192.168.1.1, where it asks us for a username and password to access. The default credentials are: user admin and password admin. Then it shows us the initial screen of the Gateway configuration.

In the initial setup, we changed the admin password.

Then on the network interfaces, the WAN port is configured by DHCP associated with the home network. In the LAN port we leave the IP by default.

Then it asks us to configure at least one wireless network forcibly. One called WIFI-RUIJIE is created with the password Admin12345.

Then we wait for the configuration to be done.

Now we verify that the AP is provisioned on the Gateway. From the web interface we access the WLAN option and then choose the AP Management option.

It is verified that the Access Point has been provisioned from the Gateway, therefore we can establish configurations to the wireless networks. Now we make the name change to recognize the AP that for this case we will place AP-RUIJIE, choosing the AP and choosing the Edit option.