This is an old revision of the document!
Table of Contents
TELNET MANAGEMENT
Telnet is an application protocol used on the Internet or local area network to provide a bidirectional interactive text-oriented communication facility using a virtual terminal connection.
Next, a small scenario is carried out where a serial cable is connected from the PC to the Ruijie Switch and assign an IP address for the management of the Switch by Telnet.
1. Network Topology
This will be the topology for this scenario:
2. Configuration Steps
- Console connect to device
- Set ip and gateway
ruijie(config)#interface vlan 1
ruijie(config-if-VLAN 1)#ip address 192.168.1.1 255.255.255.0
ruijie(config)#ip route 0.0.0.0 0.0.0.0 192.168.1.2
- Set telnet password
ruijie(config)#line vty 0 4
ruijie(config-line)#password ruijie
- Set enable password
Ruijie(config)#enable password ruijie
3. Verification
- Telnet 192.168.1.1
- Input telnet password
- Input enable password
